Search results

That great thanks. I’ll try that tonight.

According to the manual code shows USER INTERFACE.

Still showing an error code. I’ve added a picture.

Yeah that the frustrating bit. I actually did that to start with but still caused the error code. Would it matter what way the cables went or does it not matter. Also if I put the cables into the connector where the link is, do I need to do anything with the current thermostat (I.e remove the...

Yes the existing one is connected to F, but it’s that one I am removing and replacing with the Hive. I just need to confirm where I put the hive. The current one connected to F won’t be used and will be removed. Thanks

Please see link for manual https://www.swaleheating.com/manuals/Glow/Xtramax.pdf

Thanks. Still not sure so please bear with me. The wires that you see on the picture feed the current remote thermostat. The hive wires I’m connecting are 1 and 3 on the hive receiver. (I.e common and heating on), so not 240v. Can you please advise where I would connect the hive on the circuit...

On the actual picture that shows the circuit board, there are two wires that goes into the connector block, which is F on the actual instruction manual. Shows as blue and brown wires. Sits next to the connector with the link. That’s the current thermostat. Thanks again.

Hello again, looking for a bit more help please. Removed the existing remote thermostat from F on the attached picture and diagram and replaced it with 1 and 3 from the hive receiver, but when I switch on the boiler it’s still showing an error code. Returned the original and all back to normal...

Thanks very much. Really appreciate the advice and confirmation. I’ll try that and all going well that will work.

Hello all, I’m hoping that someone can help please, as I’m at a complete loss. I’m installing a Hive Single receiver to my Glow Worm Extramax Combi boiler and have got to the final stage on wiring up the actual receiver to the boiler. The 240v (L&N) are connected and the system is powered and...