Search results

Fortnights holiday washing including a 6 month old and 4 year olds clothes (which are never ending).

Thanks everyone

Thanks. Out of interest what is the difference between the 1 gang to 2 gang converter and a 1 gang to 3 gang converter if only 2 plugs are being plugged in. Just want to understand why there is a problem and how going from a 1 to 3, to a 1 to 2, will help/make a difference? I will do the test...

I just turned the mains switch off in the fuseboard to take the face plate off. Anyway these are the two for the sockets in the house. Does that help?

How do I check that?

The one in the plug for tumble is 13A, the one in plug for washing machine is 13A and the one in 3 gang socket on wall is 13A.

It is a 13A fuse.

Judging from this photo i assume at one point there was only the one plug socket there as there is only one set of black and red wires going to it.

Thanks. I guess thats not a simple DIY job?

So what would the suitable set up be for both to be used at the same time, if there is one.

Ok i will take it off the wall and have a look when this wash has finished. I will try and post a pic after. Thanks

Not rented no.

Yeah we just got back from holiday so lots of washing so whilst one lot is drying another lot is being washed. What do I do about the size difference between the 2 gang and 3 gang one? Am i correct in assuming the 2 gang would be smaller in length? So we shouldnt be using both together? Thanks

Hi No extensions are used. Just fixed wall plug sockets with just the tumble and washing machine plugged directly into it (in the wall). If washing machine or tumble are used on their own no smell and no heat from the socket on the wall, if both used then heat from socket on wall and smell...

Ok thanks. Do I have to replace like for like? ie does it have to be one without the on/off rocker switches for each of the 3 inlets? Is this a specific type for utility room appliances? Thanks

Hi all In our utility room we have a 3 gang way plug socket on the wall behind our tumble dryer and washing machine and if we use them both at the same time the plug socket where the fuse section is gets very hot and starts to smell....a bit like fish. The smell is very strong. However if we...

Thanks for this, I believe everything on your list will be checked off when it is all moved shortly. My shower is a 0.5bar min operation one. I do have a 0.1bar being delivered today but wasnt sure if I should swap them over or not. I have also ordered a 1.5bar twin negative head Stuart Turner...

Where else can it go then? Cant go on the floor as there is no physical space for it and have been advised by you guys that it is not suitable in the loft. Or will the negative head be ok in the loft at 1m distance from CWT? Noise issues when in use? Or all the time? Thanks

Ordered the Stuart Turner Monsoon negative head twin pump and getting it installed on the shelf in the airing cupboard. Hopefully this resolves the issues. Thanks for your help.