Search results

not trying to be a total a*se but the missing blanks and the unclipped main earth and meter tails are class one fails (IMO) (sorry just read your post regarding the blanks, i apologise) The emergency light is a good idea, if you don't want to go that far i often fit a separate circuit to...

Zs is fine mate but it includes your bonding which will artificially drag the scores down Thats why you test Ze as well right i'm off to bed...talking about work at 12.30 is just nonsense!!!!

depends if his missus is giving him hell then it could be urgent!!!

Personally i think if you are aiming at the domestic market then a part p qualification is a must. 2391 gets really bad press as being very hard but personally i think its a wicked course that gives you a brief overview of testing. We put one of our lads through a 6 week part p course...

don't forget your warning tape!!! i had a NICEIC bloke pull me up on it once magic!

use your tester set to measure earth fault loop impedance (EFLI) when you measure EFLI of the original impedance you'll get a feel if adding the extra cable etc is going to send it over the limits for the MCB. When you retest the new installation you'll be testing the resistance of everything...

500mm overlaid with warning tape as far as i know. Different regs for farm land feel free to correct

Unless the original installation's Ze is sky high you'd be surprised how low the Ze of the additional installation comes in at. For the DIYers just lob some cable in...it'll be ok :D Sorry been a long week!!!!

I can't wait for the B&Q guide to fitting them!!! Did you write a billion letters to the IEE for the 17th edition? :D I don't mean to take the p*ss its just i read a few threads and saw you mention them loads.... i suspect its been mentioned before!!!!! :lol:

Personally i'd issue a MWC and a covering letter regarding why the change was made. I'd also note that a full PIR might be advised due to the DIY nature of the electrical installation. But then i love paperwork!!!!

I'll take that as a yes mate..... :D

I don't understand why we aren't pressing for some kind of official standard that is clearly shown to customers. I don't know if maybe i'm cursed or something but the amount of shocking (no pun intended) DIY efforts i see is beyond belief. Last week i went to a job where the home owner...

I might be going over old ground here.... But you like your rcbo's don't you??? bs7671 17th edition must be like christmas!!!! :D :D

Yeah you have a point. It also makes clear how poorly the government has put the part p message across. A part of me kinda wants to see the kitchen fitter change a consumer unit with the tails still live though..... :shock:

I'm sorry but this just drives me insane.... In the last week i've had 2 instances that have just made me go totally mental.... I was in B&Q desperately looking for a SW/FCU as like an idiot i'd run out and needed one for a job... To say this place was in the middle of nowhere is an...

Having just lost an apprentice.... if you lived in Sheffield / South Yorkshire i'd give you a go now mate! The main stumbling block you have as a older guy trying to get into the industry is pay. For smaller outfits its very difficult to pay decent money to someone who isn't going to actually...

recommended unless you are a kitchen fitter when isolators, safe zones & minimum distances go straight out the window!!!! The socket above the cooker i saw 2 days ago took the biscuit!

Did Part P get cancelled or something?

>>Its a perfectly legitamate question No its not. If you are even considering changing a consumer unit yourself you should know what is required. Sorry to be so blunt but its a fact

hi Just wondering what other people's experience has been with the various certification schemes. I've been registered with the NICEIC DI scheme for a year and have to say they aren't exactly friendly!!!! I was wondering what people thought to the other schemes, Napit, Elesca etc. I'm...