I do not know about quick, but the powershower switch needs to outside the bathroom, so have a look where you can fit that, do away with the socket, make it hard wired in to a FUSED SPUR to the powershower BEST with an RCD FUSED spur to be precize
A whole centimeter is much, that added to the current space you already have on the curren760 doors,
I don't think it will work, what you need to do is pack the door style out, with an additional 1cm, and then you also have to increase the doortrim with an addtional 1 cm or take the...
Is it possible to have two mater telephone outlets
I have the overhead cable comming in, and would like to split it in two master BT sockets
one is a temporary and will be taken away later one, and one will be the new one
so can i have two master sockets
Thanks
Some more pics of the retaining wall, now with plants
DSC_2497 by mcluma, on Flickr
DSC_2496 by mcluma, on Flickr
DSC_2493 by mcluma, on Flickr
DSC_2492 by mcluma, on Flickr
Still need to do the capping and painting
I agree, just replace
write down which pump it is, and when you where up the loft, you should have checked if all four pipes could easily be isolated to replace the pump
I would replace like for like, then you haven't to change the pipes
I like it
bought a new house :D :D and then lath and plaster :wink:
Ok
This is messy, no i mean really messy
did i say it is messy
probably not
trust me its messy
If this plaster is with horse hair, beware, make sure you were full facemask and gloves when taking it out...
works good, but..........
on the one sky box you have to change the channel in the setup
normally they are on channel 69, so one you have to change to 71 or something, otherwize they transmit on the same channel and you cannot tune into it.
to do this, you first have to unplug one box...
Silicon is not used to seal the cut edges, the particle board needs to be varnished, twice, three times, to stop water ingress
then you set the sink in with silicon, silicon is not there to protect the cut edges of the worktop