Search results

So by how much should the new plaster boards be below the existing surface level?

I don't know if this is something I can do myself. How much should I expect to pay for someone to do this for me?

SO far I have understood everything including all the terminoligy except recess. What is that?

I was just hoping to fill in the gaps in between the plasterboards and then simply paint over it.

I cannot seem to find any 95mm studwork timber. I can just find 94mm or 96mm from B&Q. So I will either end up with 130.5mm thinkness or 128.5mm. For example 12.5mm x2 plasterboards 9.5mm x1 plasterboard studwork 96mm or 94mm

We have a wall between 2 rooms. The previous owners of the house cut through the wall so the 2 rooms appear as 1. I would like to somehow fill this hole in the wall to make the 2 rooms separate again. Please see the image below to see the wall and dimentions. I thought I could use...

Is this a strong way to join a post (leg) with the side railing and the foot railing? The side railing has a 3" tenon which is half an inch thick, and the foot railing has 3 half inch drill holes into which I insert 4" wooden dowels which go through the leg, the tenon and into the foot post...

Do any of the following values translate to 6mm? 3/16″, 1/4″, 5/16″, 3/8″, 7/16″, and 1/2″

How can I push out a dent on my door? I have removed the trim from the door, but I cannot get to the dent because it has a bar infront of it.

I;ve just downloaded their brochure, but the search feature is not working. On which page are these timber boards? http://www.championtimber.com/media/UserMedia/timber.pdf

I cannot find anything with a minimum of these dimensions. length = 1664 mm height = 380 mm depth = 27 mm

Where are these sold?

If I post up the final design tonight which is well under £100, will you guys be able to tell me the best way to connect the legs to the side rails? I am not too sure I will be able to use furniture bolts. I know where to get the bolts from which will need to be around 125mm, but I don't think...

Is it possible to get a plan of your existing house from somewhere? Council maybe?

Thanks for pointing that out. I will find out.

I can't drill from the other side because I am drilling into 1" by 2m timber, and I only need to drill into it by 125mm, So I can get some furniture bolts in there.

Basically, I have something like this at the moment: But want something like this in the end: How would I go about doing that?

How difficult would it be to build a staircase one level above the existing staircase into the loft?

I have some timber which is 1 inch thick and need to drill a few holes length wise which are 150mm long by 13mm wide (diameter). How can I ensure the hole is straight and does not come out from the side of the timber?

Not sure what furniture connector bolts are. Do you mean doing something like this, so connect the legs with the side rails?