Search results

Hi. Some clever person stuck an addisive paper dado rail on the wall and even by soaking the rail with water the paint on the wall came off with the paper. I now have areas where the paint is missing,and would like to repaint the wall but how do I get rid of these areas of no paint so that...

My flue is situated on top of my garage and does not have a top to prevent the rain/snow etc from entering down into the system. Can anybody advise as to whether I am allowed to make my own flue cover or is this contravening some rule.

Photos as requested attached.

I have removed the 50w bulb from one of my porch light recess's and pulled the wiring down which reveals whats shown below. When I pulled the wiring I thought I might find the transformer,but there was nothing,and the recess was too small for my hand. Can anybody advise what I can do next...

I have two porch lights which do not work. I have removed the 50w bulb,the housing for the bulb, and I am left with the connecting 12v white cable attached to what appears to be a small black connection which has the leads from the 240v in one end and the 12v cables leading from the other...

The flashing measures approx 15cms from wall,and it flows over where it is fitted to wall,down onto the roof.

Yes,we have lead flashing which goes up under the cladding and therefore makes it difficult to see if the flashing is actually cemented into the bricks.

I have found a leak in my conservatory where it is attached to the wall. The other problem I have is that we have cladding on the wall above and around the top of the conservatory. Can anybody advise the best way of trying to do the following: 1) Locate the leak. 2) Locate leak...

Thanks for the advice. The problem I think I may have is access to the transformers and wiring which would appear to be set into the space above the plastic cladding where the lights are set.

I have three of the above lights fitted to the ceiling of my front porch. the problem I have is that two of them are not working. The light nearest the door works but the two furthest do not. I have checked the bulbs and they all work. Can anybody identify what may be the problem.

I've checked inside the shower and found nothing untoward. All electrics are connected!!!

I've checked he pullcord for damage and found nothing,it all seems okay.

Pullcord has a light which is working, however,when I pull the cord to the off position,the light remains on. Surely,this cannot be correct!!!

Hi. I've checked the board and found no fault.

Shower: Triton Bermuda. I was having a shower when the shower just stopped!! There is no power light showing and no pressure light working at all. We have never had any problems with the shower before and would welcome any advice as to what the problem may be. We have a combi boiler.