Search results

Hi, at the moment the 6mm comes straight from the consumer unit down inside the partition wall and into the connection unit. The 45a cooker switch was removed temporarily for decorating. I put the 45a connection to avoid hanging wires in case anyone turned on electric. The new 13a sockets will...

Hi, the oven and the microwave are within 1 meter of the 45a cooker connection. I have a 45a cooker switch. Would it be better to use this and have the 6mm going in as supply then wire out to 2 x 13a single sockets?. Would 2.5mm twin and earth be ok or would I need to buy some 4mm. Or I would...

Hi, looking to hook up a built in microwave and a separate oven in my kitchen. There is an existing 6mm cable direct from consumer unit. It's on a 32a rcbo. The oven and microwave came with 13a plugs attached. At the minute the 6mm is straight into a 45a cooker connection unit. I will...

Hi. Replaced one of the fuses on pcb as it was blown. Turn the power on with no battery connected and the power light does not illuminate on main unit or key Pad. The keypad lights up and the interior motion sensors are working?. There is a tone when keys are pressed on keypad but nothing happens.

I removed the battery and powered down. I will power up tomorrow as it's late now do not want to disturb neighbours . When I power up will I connect the battery first or just power up without battery. Last time I powered up without battery only key pad lit up no power light on main unit or...

Hi. Thanks for reply. When I flip the mains fuse for alarm nothing happens. The backlight on the keypad lights up and makes tone when keys are pressed. Also the motion sensors in the house flash red when movement is detected.

Hi, We had a power cut with the strong winds last week. Since then my alarm has stopped working. When I turned the power on the main unit internal buzzer was sounding so i flipped the fuse for the alarm system. Now when I turn the power on to the alarm there is no power light on the main unit...