Search results

Hi All i need to replace the cartridge on my mira mini duo shower. Ive srripped it back and just now need to remove the cartridge (see pic) question is there some sort of special tool i need. I csn see there are some flats on the cartridge body but i would need a big spanner to get a fit...

No sorry. I thought id confused things as the picture is upside down. So the part that ive circled actually screw up onto the threaded bit that comes out of the boiler.its this joint that is leaking

Green circle shows where leak is coming from. This is where it conects onto the thread that prodrudes from under boiler

Checked and nothing in the filling loop. Wonder if it was never fitted with one. Found this pic which is nearest i can find and it shows 2 washes and an olive so obviuosly all 3 conections must require a seal

Directly above it is the dhw flow turbine which has a mesh so it wouldnt get through but no sign of owt on the mesh ?

Thanks for the replies. When i push the nut down i can see the top of the inner part and its just metal definately no remnants of any washer

Hi ive got a leak to the cold feed to my boiler can anyone advice if this joint should have some type of washer or joint compound Any advice is very much appreaciated

Thanks very much for this. The house was in pretty much original 1930s condition with only 1 owner up until around 15 years ago when the previous owner purchased and extensively refurbed it. Afaik it did not have a shower fitted until the refurb. Ive booked a asbestos guy who is coming back end...

So thats why i pulled the bulb out as i wanted to try and see if it was a separate board. Problem is the metal insert of the spotlight extends further back so i cant see the edges of the board. I could pull the insert but didnt want to risk loostening or disturbing anything further

Yes thats right. Plaster board over it

Thanks for the reply. So the house is 1930s Not ex council. The vacume was a wet one where it sprays water then sucks it back up

Hi all I have tried to remove a small area of ceiling to access my shower trap. I drilled through the plaster board but then the drill went into sonething harder. At first i assumed it was joist but have pulled away a small bit of plaster board to reveal some other type of board behind it. I...

Ok so would this look different to the picture of my neighbors. Would the plaster just stop sort of giving a square edge or would it be sort of beveled on the edge

Hi. Ok yes sorry I wasn't ignoring what was originally advised and obviously value any advice. Just not sure how the edge would look if it was finished using wood as an edge to work too. I think my concern was that the brick edge has some variation. In it ie its not perfectly straight and I was...

Thanks for the reply. Im just wanting to know if its possible before i try and get someone in to do the job My neighbour has a similar fireplace and I got a pic of how the plaster was finished around the edge buy wasn't actually sure how it was done

Hi just wanting some advice. I want tk plaster the face of my chimney breast but not into the enclosure so want the plaster to finish on the edge around the opening. I was hoping this could be done without using any kind of beading or stop bead edging but didn't know if it was possible so just...

Thanks for the advice its very much appreciated

Thanks for the reply. Ok how do you generally attach the angle iron. Also do you use plain or galvanised steel. I've been doing some research snd I think as you said that normal steel may be a better option as the thermal expansion is less than Thanks for the reply. Ok how do you generally...

Here's pic

Hi hoping someone can advise. Im curently attempting to fit a register plste (closure plate might be best description as i have a liner fitted) plan was just to attach alluminium angle around the inside of the chimney and then screw the to the angle (or angle to plate) pics show what I've done...