Search results

Hi, so i adjusted the arm and it has worked a treat, the water is now coming into the cistern just fine and it refills fine after flushing too. I have noticed that when the cistern is refilling after flushing, the valve seems to be dripping a little, I've attached a photo with an arrow pointing...

Aah yes okay! Thank you, when I was putting it back i did get stuck on this part and couldn't remember which section the arms part should be on. I will adjust it tomorrow, fingers crossed it does the trick. Ill let you know! Thanks again

Hi do you mean the fill valve? I have attached a photo of the fill valve and also the isolation valve underneath.

Hi, is this a new fill valve and also isolation valve? Do you think I'd need a whole new one? I have attached a photo of the type of isolation I have at the moment, I am unsure if im adept enough to change it over!

Hi guys thank you so much for your help. I managed to change both the float valve and flush valve washers etc, the float valve washer had a split, and the flush one was caked in limescale and has broken away. But I now have a different issue which has left ne baffled! After replacing, I...

Hey guys, I have purchased a replacement flush valve seal etc and also replacement washer for the fill valve incase I need both. I wondered if any of you would be able to maybe help me with how to fit them? All i know is to isolate the water and I think somehow the flush and float part will...

Thank you this is very helpful

Thank you for your help much appreciated!

Thank you this is very helpful. It does have an isolation valve, I will isolate and see what happens shortly. If it turns out to be the Siamp float valve, will it mean replacing the whole thing? And if it may be the flush valve seal, when replacing these parts are they all the same? I am worried...

Hello! I have a small leak in toilet. Water is trickling from the fill valve in the cistern, but also down the back of the toilet bowl. I would like to fix it myself as I heard its relatively easy but just wanted some guidance. I am thinking it may be a washer that's worn or something...

Hello, I have a dripping hot tap in my kitchen. They are Bristan lever taps. I would like to change the CD valve (I would be changing both). I have purchased the correct valves. However I cannot seem to undo the existing valves, they're solid. Any advice or hacks on how to undo them? the...

There's nothing wrong with the rest of the tap. The valve needs replacing which I've stated. If you cant help with my question then not sure why you commented.

I am trying to replace the CD valve on my kitchen taps. From what I gather this valve is supposed to come undone using a wrench, is this correct? I am struggling to remove the old one, I have attached a photo as I want to double check that this type of valve is definitely removable. If I'm...

@RandomGrinch Hey there! So I tried what you said with the emery board and it worked like a charm! So thanks again!

Hi there, Yes my neighbours buttons all work. Thank you, I did noticed those contacts looked somewhat unhealthy! I will try and give them a clean and see what happens. Thanks again, I'll keep you posted!

I have a VIMAR 8870 wall intercom system. Currently the button you press to release the communal door is not working. Everything else is fine, my buzzer works, i can speak through the phone but its just the one door release button. Any advice on if there's any easy fix on this? I wanted to see...