Search results

There is enough I am a shortie so can walk through, I may just try this and see if it works - all this constant rain has not helped. Thanks to all of you who have replied and given your thoughts, really appreciate it.

I was thinking of just planing the door across the edge once it dries up.

So essentially just unscrew and adjust the hinge from the pin? Sorry not sure what the staple bit is on the hinge

Hi Our garden gate which is circa 8 years old is now leaning towards the lock side from the top, it’s obvious that the gate fence post is bowed from the top so I’m after a short term solution where I can at least shut and lock it before summer and then attack the post to fix the issue. Am I...

Thats a great analogy with the car which makes perfect logical sense, I mentioned this to the BG engineers upon their visits, but of course they are following F.28 diagnosis as per their documentation and experience. I shall reach out to BG and see if I can get an engineer over to clean out...

No, and to be fair that’s the last thing the BG engineer mentioned it can be if it locks out again which I suspect it will soon. It’s not part of the BG service so I will need to get someone in to conduct that strip service and give a clean.

So the BG engineer from what I saw did test this pressure at the boiler and the Gas meter whilst using the P.01 program at 0% to 100% to ensure the pressure was correct and OK. He advised me it was. Yes it does make a slight bangon ignition attempt 2/3 or even 4 for that matter.

Yes that pretty much a common scenario from my logging so far, however the parts changed so far should have ensured the ignition attempts are at least 1st if not second most of the time.

Just a counter top gas cooker -I could try and test that and see what happens

Thats a good shout I can certainly double check that although the trap was clean and water was flowing out decently. My curiosity is more around ignition attempts still taking 2-3 times, even after all those parts have been replaced.

I very much doubt so being a new build, everything else works spot on.

No unfortunately not, its 6 years old now. Forgot to mention the HT ignition plug was replaced as a part of the Electrode. Good point on condensate exit, its hidden as its a new build, as its next to the rear main wall its probably exiting to where the outside hose pipe drain is adjacent to the...

Hello everyone, I'm seeking advice on a persistent issue with my boiler. Since January, I've been dealing with an F.28 error code on my Vaillant Home System 15 boiler, which requires me to reset the boiler to get it running again. Here's a summary of the repairs and checks that have been done...

Thank-you, deleting and learning the Siren worked. What are the advantages of having Wireless Bell Supervision set to ON as opposed to OFF? Is it needed?

Hi I had the same issue as this last night the wireless bell decided to throw a bender and start alarming at 4am. As a result I had to grab my ladder and just remove the batteries as I was half asleep. I subsequently set wireless bell supervision to Off for the future. Today I replaced the...

Thank you for this explanation. So Lovell's were correct in their statement to me. Fair enough. Will I be able to upgrade to Nest/Hive/etc easily?

Yes I understand that’s how it works right now, however the manual clearly states as a user, I can select modes of operation. Heating or hot water only or both. I am struggling to understand how this is customer fiddling with the system?

I think you could be correct, this is what the Vaillant tech support guy said to the Builders supposedly. Hmm ok

I thought as much, thanks guys really appreciate the prompt response. They use a contractor called Rolec who came over today and are convinced this is how it works. I was even told it’s a display from a combi-boiler which I quickly dismissed as I know that’s not the case. Could it simple be...

Sure I’ve tried to capture it all in one shot. The builder is Lovell’s.