Search results

Thinking of fitting a wifi light switch but the original one only has the t&e and the wifi asks for a live neutral. it runs through metal conduit would i be able to run a single wire up the conduit to the ceiling rose live? please no smart arse comments

moved into a council house where the 32amp cooker switch is on the wall to one side of cooker opening which leads to a 3 pin socket behind where the cooker is going. My question is would it be ok to wire a 13amp plug to the cable thats comes from the cooker to the 3 pin socket. As the socket is...

i have a consumer unit in a garage and have a shed about 15" from the garage and want to install power to it already have the lights and sockets all ready to be powered off a new consumer unit in the shed can anyone tell me the best way ie what cable should i use to get power from the garage...

i have a caple filter tap and the tap has started dripping i have looked for a replacement cartridge with no luck they all seem to have splines at the end which mine don't have also mine has a spacer half way along. Anyone have any advice?

hi I'm thinking of changing my thermostat running off a Worcester combi but the wiring has me a bit puzzled the new one has only 2 wires but the one I'm taking off has 4 please see pics replacement>> wiring diagram for exsisting>>> exsisting>>>> anyone know how the wiring is supposed to...

i have put 10 ceiling lights across the top of the stairs but as i could'nt put the loft insulation over the lights i just left them uncovered. now its getting a bit nippy you can feel the chill across the landing is there anything i could put down to stop the heat escaping or cover the lights...

moved into my house and the person before me must have got a good deal on red paint as everything is red so how would i go about painting over it have tried 3 coats of white emulsion but you can still see red streaks anyone have any ideas ?

i have a 9.5 KW shower to put in but to run a 100mm cable would mean lifting carpets and floorboards in 3 room to get it anywhere near the fuse box and was wondering could i tap into the heating boiler fuse switch which is 13 amp then to a RCD consumer unit with a 40 amp MCB then to the shower?

Hi all i have a sunbed connected to a 40amp trip with 16mm cable and the timer part of the bed is on a 13amp plug with is used on the ring main. The problem i have is everything will be fine for a few days of use then the bed will trip the rcd on the cu at random i reset the trip and it will...