Search results

After Power flush and fitted new hot water sensor, hot water working ok. Still intermittently pressure going above 3. Currently CH & DHW are ok.

Thanks very much, I'll try this.

When hot water tap open the system stated to work as normal and then hot water sensor fault light flash for few seconds and then system start again. Any suggestion please?

system was working ok with pressure at 3 for some months. but problem started with DHW again. filling loop isolator valve is ok. when turn the hot water tap, the system starting as normal. when the temperature goto 30/40 then fault light 70 flashing as hot water sensor fault. then after few...

Boiller's pressure is alway above 3 on the scale. I tryed draining the water and bring the pressure to 2. But when using HW or CH, pressure go back to above 3. Last week fault led (70) is started to flash as a fault on hotwater sencor. But now both hw and ch are working with pressure is above...

Thanks for your advise sleepyhead. Today I have removed the brushes and checked. It's not broken or damaged, but nearly worn out (2mm left). After cleaned and refitted, the washing started to work now. Thanks again. For my future reference do you know the part number for the brushes and where I...

Thanks for the reply. I'll check the motor. In my case not even water is going into drum. Is it possible faulty motor preventing water valve solenoid to not activate?

Any members have second hand Indesit PCB ( module) reply please.

Hi, our washing machine stopped in the middle of washing. I have removed 3 x 5p coins from bottom drain pumb fillter. After that machine not starting at all, what ever program is selected. When I pushed the ON switch, the red lights flashes twice and then steady. Then in few seconds can hear a...