Search results

  1. S

    Vaillant uniStor 310 - heating times & heat loss

    If I specify a water heating time from 17:30-24:00, it then periodically causes the heating in the radiators to drop. Therefore, I would like the water heating timings to be adjusted to my requirements -and of course to economise. Back to the original question: If the uniStor 310 is...
  2. S

    Vaillant uniStor 310 - heating times & heat loss

    Looking at the following documentation, Vaillant seems to be inconsistantly stating the heating times of the uniStor cyclinders: See page 6: http://www.vaillant.co.uk/stepone2/data/downloads/c9/42/00/uniSTOR.pdf See page 4...
  3. S

    Vaillant Total System Solution - inconsistent heating

    Excellent, looks like we're making progress here. I've set the following and so far after 3 hours of the heating switched on, the on/off cycling hasn't occurred once: - 52*C HW - 55*C CH - 3.0*C Heating Curve - 37kW Boiler Rating However, despite the continuous heating, the bottom...
  4. S

    Vaillant Total System Solution - inconsistent heating

    For now, I'm trying the following: * Heat Curve set to 2.6 * C * HW set to 55 * C * CH set to 55 * C I don't want to going beyong the 12 o' clock mark on the dials so to avoid build up of limescale etc. 55 * C water is hot enough. Yes, I have received the blue CORGI certificate...
  5. S

    Vaillant Total System Solution - inconsistent heating

    I will try setting the heat curve to 2.6; however, is it really required to turn bith CH and HW dials to 100% ? I'm happy with 55*C HW.
  6. S

    Vaillant Total System Solution - inconsistent heating

    Heating Curve is set to the default factory setting of 1.2 degrees celsius. How do I override the weather compensation and modulation settings? I would much rather prefer a situation where I can control how hot it gets and then manually switch it off when as I feel like. House is larger...
  7. S

    Vaillant Total System Solution - inconsistent heating

    Thank you for the responses and suggestions; I'm in the process of chasing the installer. * No, there are no codes flashing on the boiler; all seems fine. * 10 Radiators throughout the house. * Yes, tried both control knobs on the boiler to 100% (water and heating). * Yes, VRC430 showing...
  8. S

    Vaillant Total System Solution - inconsistent heating

    Hi All, I've just had installation of the Vaillant Total System Solution consisting of the followng components: * Vaillant ecoTEC Plus 637 Boiler * Vaillant uniSTOR 310 Cyclinder * VR 65 Control Centre * VRC 430 Digital Weather Compensator * Blue Pipe 25mm * New Radiators * New...
Back
Top