Search results

Hi Please can someone advise me if I can replace a manual dial Heating Thermostat Controller with a new Digital display or is there wiring issues? My heating system is aa Combi Boiler Type I have added a similar image of my current Thermostat Kind Regards Paul Wilson

Sorry my spelling was ridiculous in that last post. OK I can picture what is happening now. What secures the Tap connector and feed pipe to the Tap connector. So the Tap connector doesn't come back through the hole. Bearing in mind I have used Flexipipe Regards Paul yes :)

So screw the Tap connector onto the shower Outlet first. Then put then drill a hole in the Tile ans wall big enough for the tap connector to go through ??? Regards Paul

Hi I'm watching the discussion on which method is best. One question regarding this. I can get round the back but with the thread on the Outlet being only 15mm it is not long enough to go through the Tile and wooden board wall which is about 10mm. No thread comes through to screw the Tap...

Hi Superb. Thanks for your help. It been much appreiated Regards Paul

Hi That's superb. Thanks for your patience with me on this. Regards Paul

Hi I can see where your coming from. My problem is. It is a wooden board false wall with approx 18 inch gap from the false wall to the main brick wall Regards Paul

Here is the sort of thing I think I am after

Hi Thanks for your mail. I've Plumbed it with Flexipipe and push fits (as I'm not a Plumber :lol: but really enjoyed the experience. Would it still be ok to use 15mm connectors with this. I take it the pipe would have to be fixed rigid at the back so the connectors don't come through hole...

Hi It has got a threaded part out the back but its only 15mm in length. If I screw the wall plate to the outside of the wall it looks like the water feed to it will be on the wrong side of the wall (the wall is made of wooden board) . i'e on the Tiled Part of the wall. Should the wall...

Hi That looks like the sort of thing I am after. Thanks for your mail. It does have a 1/2" thread. But looks like I still may require a cooneting piece. I take it the wall plate screws into the back of the false wall not the front of the tiled area. Regards Paul

Hi Thanks for your mail. I'll try and get a couple of pics and post them in. If the outlet threads were about double the length that would solve the problem but lookig at other examples on the Net. This looks like the standard length of thread. So I'm thinking you have to fit some sort of...

There is a picture of the Shower outlet on the Screwfix site //www.diynot.com/shop/SHOWER_WALL_OUTLET_CHROME/6603 Regards Paul

Hi Thanks fro everyones help. I have Uploaded my new image and taken the option to "Show my images" hopefully now you should see the Image of the shower outlet. :oops: Regards Paul

Hi Thanks for your mail. Sorry I'm new to this website. That should be the picture of the valve. The threaded part is hidden if you require a picture of this please let me know. Regards paul

Hi I have fitted a concealed shower valve and can still gain access to the rear of it. My problems is fitting the outlet valve which supplies the shower head (see my images). When the tiles are fitted the threads on the valve are to short and do not appear through the other side. Therefore I...

Hi Steve Yes mate, have the old piece but it has angled edges. That's why I was wondering how these were cut. But like you said. they may not have to be Regards paul

Hi Steve Thanks for your mail. I'm open to suggestions for cutting it :? . I've had a look on the Net and I believe the sink is called a "Semi- recessed basin". The sink is the original sink. I am replacing the piece of worktop it sits in. So I don't have the template for it. I've...

Hi Steve Thanks for your reply. Yes mate you are correct. The edges are angled and the sink sits in it. The material is like a Kitchen worktop only not as thick. About 30mm. I was also wondering the best place to look for this if you have any suggestions. I will get the exact picture of...