Search results

Hi all, i`m fitting a manrose inline fan to my shower room, i am struggling for space so want to know if i will be ok to drop the exhaust side of the unit down away from the unit about a angle of 45degrees and about 3metres long hose then to the outside, cheers mick

Thank you TTC :) Mick

penny as just drop lectrician, what you say is the 2 reds together away from the fitting and not connected to the L fitting connector .then the black to the fitting N connector and the black with the red tape to the L connector :) Mick

Thanks for the speedy reply lectrician, so what your saying is i connect the black wire with the red tape on into the connector with the red wires, :) Mick

happy new year all, ive got a single bulb light fitting in my garage, the wires are as such in the L section there is a wire for the bulb then a black wire with red tape on it, next section Loop 2 red wires, next section N a black wire then the other wire for the bulb, the other light i want to...

hi all,i`m going to be removing some radiators but when i come to refitting rather than use PTFE tape what paste can i use in its place to seal the treads cheers mick

hi all, i removed a single radiator and tried fitting a towel rail, big problem the pipes are about 20mm from the wall and the connection for the rail are about 70mm from the wall, is there a easy way round this, also my heating system is on a combi boiler do i just turn the water off under my...

hi all, could anybody please tell me were the sensor for checking the surrounding air temperature on my fridge/freezer is located on it

hi all, i`m going to build a raised flower/veg bed single brick wide 4-5 course high , can anybody tell me how big a footing H-D-W i should put in, cheers mick

hi crazydaze, the floor was level and not loose or uneven just like the one floor that i did without nailing, all floors were layed on special sticky one side under lay which we got with the boards

hi all, i laid a floor using 20mm hardwood engineered boards on a floating floor and made the biggest mistake possible by nailing them down so now they creek like mad when you step on them , can anybody give me some surgestions how to stop them creeking with out taking them up, i also layed the...

8)

hi all, last year had a freezer go down in the garage due to the cold weather, so have bought a small chest freezer, to protect it from the cold have thought about putting polystyrene sheets around it and on top but leaving a gap between them and the chest, what do you think !!! cheers mick

hi masona, when i said it works fine i should have said it works when the door is open but same problem when the door is shut, cheers mick

hi masona, did that and it works fine, cheers mick

hi all The lock on conservatory door has been playing up, it use to be just winter with the cold but we had the door glass replace recently and now it`s all the time, i see there are some striker plates but need abit of guidess which to adjust i don`t want to make it worst then it is, so all...

:) hi all, i`m going to build a 4 sided wall for my fish pond out of breeze blocks, the blocks will be layed flat and 4 blocks high, what i would like to know please is do i lay the mortar "5 to 1 mix" to cover the complete block or just along both the longest edge, cheers mick :D

thanks for the speedy reply again john, what i`ve done is put it inside in a old bedroom to see if it comes back to life if it works great if not i`ll sling it away, p.s don`t think the wife is going to be too impressed when she comes home from shopping to find what i`ve done :D , cheers mick

thanks for the speedy reply burnerman, this might sound abit daft to ask but what if i covered the unit in cloth sheets would that work to get it warmed up, cheers mick

hi all, i have a indesit fridge freezer model number BAAN 10, it is in a very cold garage but as stopped freezing, can you tell me if it is because it is in the garage the unit is only about 18month old, cheers mick