Search results

Hi, I've just spoken with a chap from Salus technical and he confirmed my wiring was correct as originally posted. Lr to No Ls to Com Ns to N and leave the link on Salus in He then advised there are 32 different combinations of channel settings and said they like customers to try...

Hi Picasso, after reading your comments above re the Ns and Ls being live if boiler is on I thought then my wiring must have been correct in the first place!! The problem as it happens is the unit as I've plugged N and L to a mains plug and still cannot get them to communicate - ie get the...

Well I changed the stat feed to L and N still no joy! I'm not a sparky but don't you need L and N to get power - ie the red light should not have come on if the Ns wasn't a N? I tried as Glasgowgas suggested wiring to a plug and I can't get the unit to get a green light, the wireless unit...

Hi, I actually woke up thinking the N should go to N (power in on the boiler) and not the Ns I don't know if it makes a difference going to Ns So I'll have another go and post back later - thanks for all your help

Hi, there isn't a room stat at the moment. I wired the Salus as Glasgowgas advised above. I connected the live from live in Neutral to Ns The bridge/link was removed from both the Salus and boiler Unfortunately it still did not move from red, I've disconnected it all now and put...

Thanks for the reply. The boiler only has 3 outputs N L and S, I've read somewhere about doubling up?

Hi Please can somebody in the know confirm wiring of the above? I have wired boiler to stat: Ns to N Ls to Live Lr to SL (on) Also I have left the Link in th Salus The Salus turns on but red only - I increase the temp and the remote device tries to send a signal but the green...

after doing a bit of research this evening I think I'm going to go with salus rt500rf which can be had for £35 off the bay! on this forum I've only managed to find one troubled post //www.diynot.com/forums/viewtopic.php?p=1395357#1395357 so I'll keep my MT10 as a backup incase the...

The rad in the hall should be ok as it was only installed in feb as part of a whole new system, new pipes and magnaclean also installed. Too small maybe? when we turn the heating up on boiler control it does heat the hall ok. Just the living room would get too hot - maybe the living room rad...

LOL - I think I need to get one and set it right with the TRV in the living room low, as the living room warms up fine but you open the door to the hall and it's cold I'll look into the REV24RF - thanks for your help!

Hi bengasman, Thanks for the reply, I actually just read FAQ 12 after reading //www.diynot.com/forums/viewtopic.php?p=1405210#1405210 It doesn't say why you should put the room stat in the living room? our living room gets warm and the hall is cold - I guess if I get a wireless unit...

Hi everyone, I'm after a bit of advice, we're having some problems keeping the temp comfortable in our home. I have a 3 bed semi with old aluminium double glazing, the loft is insulated properly and the walls are solid so cannot be insulated. The hall way gets a draught through the wooden...

It cost me about £2400 all in. I got the boiler from ebay £880 inc flue and mechanical clock. Bargain! I only paid £650 labour to corgi eng (and his assistant) as he was a friend of my uncle's (who is a builder) and my uncle helped for free changing all the rads and doing some...

Hi everyone, Just a quick note to say thanks for all the replies. I have now changed my entire system, I got a worcester bosch 37cdi, new rads and pipework. Most of the gas line changed as well... A warm home at last! When the corgi eng was ripping out old pipes, some of the pipes just...

I know I didn't act on this as early as I could but I had no idea something that has been running for years and years could fall apart in weeks. I still find it unbelievable! To be honest I don't know what I could have done anyway - everyone that came to look at it kind of walked away! As I...

Hi guys, The system is now off - 5th rad went last night :cry: I had to drain off entire system as I couldn't close the TRV and didn't have a cap for it. I'd like some advice on my pipework - If I change the boiler to combi, get rid of all the tanks in the loft. change all corroded...

I've ordered some X400 to get me by for the next few weeks - do you just pour this into the f/e tank?

what you're saying is I need new pipework as well? because the pipes won't handle pressure? there are some 10mm pipes around and some 15mm - mad old setup! I've got a real wood floor down and tiling throughout my ground floor - so it's going to be a nightmare!! :shock: this is getting...

What do you think to this: http://cgi.ebay.co.uk/Worcester-Bosch-Greenstar-30-SI-Combi-Condencing-boiler_W0QQitemZ180322436316QQcmdZViewItemQQptZUK_Home_Garden_Hearing_Cooling_Air?hash=item180322436316&_trksid=p3286.c0.m14&_trkparms=72%3A1296%7C66%3A2%7C65%3A12%7C39%3A1%7C240%3A1318 I'm...

Tony, I have purchased 4 new rads now and have got them in my garage. I was planning on swapping these next weekend 7th Feb! That's another 10/11 days pumping over! A nice chap from Power Flush Birmingham has just been out and recommended changing boiler! He also turned the pump down to...