Search results

Tried everywhere today and can't get the stuff-PTS had never even heard of it and couldn't find it on their system, any numbers of places to try, Cheers

Sorry I meant .8 bar-1.0 not 8-10. i work on cw booster sets and the exp vessel on the booster pump is generally set at 1 bar, Jst checked the 105 manual there and it says 0.5 cold. Thanks for the info, appreciated. When you say cap the blow off, you mean cap off the safety valve on...

Where can I get this stuff from?

Not checked that, 8-10 bar sound bout right? I never thought of thet mind-Never ever had one go faulty in 10yrs Obviously need to drainboiler down first. Just seems to be getting the pressure from somewhere, was thinking back through diverter valve or heat ex??

Anyone any ideas if this is straight forward? Pipework is ols half inch imperial but valves are jammed shut and need swapping I have heard of "green rings", is this some conversion olive? Any help would be appreciated

Hi, got called to a job last week to a 105e, safety valve dripping-Pressure was at just under 3 bar. released pressure to 1.2bar. disconnected filling loop. heating/hot water ok when I left.The customer claimed to have "fiddled with it" before I got there A day later pressure back up to...

Injected sentinel 400 sludge remover into rads a week before. house is hotter than ever now

Don't believe anything BG tell u. They tried to shaft my aunt £600 for a powerflush that didnt need doing.Told her all rads were sludged up. Took me 2 hrs to take off 5 rads and flush out in garden.

Get a new 17th edit CU for sure, upgrade as necessary,inc bonding/earthing.install new circuits in kitchen, full test and insp and cert.

I have a fault on a combi that is tripping the overheat on the top of boiler on occasions when heating's on and hot water is run, generally when taking a shower. Checked the overheat stat and seems ok tho haven't replaced it. Does not trip if heating called for OR hot water demand called for...