Search results

Hi a friend of mine pulled up her floorboards to clear out her air brick vents and when looking around found that under a section of the wall where the footings normally are there is just a hole. Its about 300-400mm wide and seems arched and goes straight under the wall. (not sure if all the...

I was reading something that said the flue had to be 6" to comply with BS std. The Stove im looking at has a 5" flue/pipe connector. If i fit the plate first and pull a 6" flue thru the hole, then push back up the pipe ill have an inch gap between the plate and the pipe. How do you get...

I currently have a massive urge to rip my old gas fire and replace with a multi fuel burner. Ive done my calculations for the room size and come up with a requirement for a 4kw burner. Off this room is a conservatory which is constantly bloody cold. Including this into the size requiremt...

Hi ive an Diplomat Select Electric Hob (either model 1213 or 1223) One of the hot plates is tripping the fuse box. If i dont use that one, the rest are fine. Can i just replace this hotplate, if so anyone know where you can get spares. Or is there something else to check to see if i can...

thank you. at the mo it seems to be working ok again. :lol:

how much water should be at the bottom of the filter where the pump propeller thing is? Should it be completely empty or is a couple of inches of water in the bottom ok/normal?

well at the mo ive drained all the water from the filter housing (ladel and a sponge) performeed the reset and now it seems to be running ... so ill test it out on all program settings.

yes thank you for that, i had seen it, i had tried it, and i have looked at those BASIC USER GUIDES. Im after a Service Manual. (as it saiys in my post) :wink:

Any one have a manual at all for this dishwasher (service manual)?

Hi all Ive got a Bosch Exxcel dishwasher that has died over the last week. Turn it on and whatever program you put it on the timings are all wrong. Its stopped cleaning the dishes and there is a white milky residue all over. If i remove the silver tray bit at the bottom and the filter then...