Search results

Hip Hip HIP I have found them all out went thro the lot and disabled then all under coms then set them back on till I found the right ones. Now I do not have that com failer code Many Many thanks for all your help.

Hi, Yes you are correct BUT that was from control panel. You can short the two pins inside for a FULL reset. BUT that puts it all back to defaults Sorry should have given you the numberr here is what I took out Powerlink 3 adt uk p/n 90-2077,28 rev a dp4 class 11 3.7v dc/0 .5a max s/n...

That is the problem, I do not know what the other person did when they fitted the model. Looking at the mauel there is loads of things that they could have done when installing it. I just cannot understand if the model is out how can it be seen. It is looking like a COMPLETE factory reset...

which module did you remove and was the unit down powered when you did so? according to the manual the gsm module auto detects , so if removed you can power cycle the unit and it should automatically turn off that unit. As for programming it should be in the communication section as far as I...

Hi Thank you for getting back to me. I have looked in the manual at 49 but cannot see anything about turning the coms off here is the link for maual .tzk-sro.cz/user/related_files/powermaster_10_30_g2_inst_and_quickuser_en_v18-1.pdf put https:/ and www in front Kind Regards

Hi All Long time since on here Just gone to a customer and they wanted me to take out the pcb for internet connection Un pluged unit and took out. went in installer mode to see if anything wanted to be disabled but could not see anything. Reset control panel BUT got errow code come up saying...

Hi Mr Gear Yes I can understand that BUT I sent in all my details (NOT A DIY ) for information about me (Pro ) installing over 30 years Etc you must know as well as I do when you start on a complete new system there is problems that you want answers to from the tech people. Looking what you have...

I think that is a bit of a joke, I sent in all my details to their site over 10 days ago so i could get the downloads. Sent in another 2 days ago and they said sorry we will look into it. STILL no log in details been sent back. Hmmmm some firm that. Makes me wonder if I had a fault on there...

Hi secureiam, thank you for getting back to me. I know i have fitting 100's of alarms and none needed a phone connected. It is a bit misleading in the maual how it is worded. Do you know of any videas that gives installation set up? thanks

Hi all Just bought a visonic powermaster 10 Does it require a telephone connection? I will not be useing any telephone units at all. Also this is the first time using one of the Visonic powermaster 10 units is there any videos on the net about setting up and installing etc. Regards John

Same as above PLEASE I have been in touch with Raven Heat and they said they would have a look for me and phone me back BUT that was over a week ago now. Many thanks Build