Search results

Cheers mate, I think another layer of DPM, raising and tiling is the way to go. Thanks for your help

No, the gap is below the door frame as I had to raise the frame up to meet/ support the roof.

Hi guys. I have just installed a conservatory in my parents house but when it got to fitting the door frame I discovered that the brickie has put 1 row too many on the dwarf wall. This has left me with a very large step. I was wanting to bring the floor level up and just wanted to know if any...

Hi Folks, I need some advice about levelling my kitchen floor. I have just taken down a wall between the dining room and kitchen to open the space up . the problem is that the floors slope away from each other (up to 30 mm in places) and that there are still some old marley tiles that I cant...

Cheers mate

Cheers masona, Pipes are well protected with lagging, tape etc. So you reckon just sand/ cement, no concrete then. The holes are roughly 4-5 inches deep.

yes i know sand and cement/ concrete, what I was asking is what is the best mix (ie. ratio) for this job.

yes thats exactly what I'm saying. Any advice?

Hi all I've just removed a couple of radiators in a ground floor extension and put in a new one in a different position. The floor had to be tracked to a depth of 5 or 6 inches. What I would like to know is what is the best method/mix for filling these holes? Cheers

Good advice b-a-s, that way I can avoid any nasty defrosting incidents caused by trips. Cheers mate

my apologies, I meant a spur. I basically just want to hide the leads to make it look neat.

I'm currently fitting a new kitchen and I want to have a dedicated power source hidden behind the cupboards for the fridge. There is currently a socket above the area were I would like to fit it , how do I check whether this socket would be suitable to come off?

Cheers mate, Think I'll take your advice and get someone in to have a look at it

Hi Guys, I recently moved in to an old house which has had a ground floor extension at some stage. My problem is this, there are 2 cu's, 1 in the extension which contains both kitchen and bathroom and 1 for the main building. My problem is this: the cu in the extension seems to be running...