Search results

I have a Vokera linear series combi boiler and a Honey well CM67 programmable thermostat which I want to change as it is too complicated to use. I wish to change it for a simple 7 day clock. Is this a simple operation? The connections to existing programmer are simply brown and blue, trouble is...

Hi to every one Need to replace my clapped out Triton T80 shower. The power cable is 6mm and has a run of approx 9m from consumer unit running under floor boards. Question is, can I replace with a 9.5kw unit using existing cable? Thanks in advance Brian

OMFG????? I only asked for advice! WTF!

Hi to all I am altering the position of our worcester 26cdi xtra and though I am a gas plumber, this is the first time I have encountered a pre plumb manifold. I will of course renew the "o" rings for refitting the appliance, but is there anything I should be aware of whilst removal? it seems...

It turned out to be the diverter valve after all! many thanks to all who replied Brian

Spot on Tony

Yes thank you :oops:

Correct, it does! Thank you for your positive advice, nice chap! Regards Brian.

Yes, give em a call and ask them to "check pipe for safety" no charge for the service either. As previously stated, they would have done this when laying new pipe but better to make sure. Brian (ex British Gas)

:wink:

Man come and he say.............diverter valve?????

Any chance of the link? found source-but you have to pay :(

Help!!!!!

Thank you for the quick reply. Cant locate the e/v any ideas Brian

Worcester 9.24 Electronic combi, water pressure rising to 4bar when c/h is on only. With hot water only no pressure problem only water does not get hot enough for a wash! filling loop is turned off and not letting by. Heat exchanger problem?? also water switch?? This is a dinosaur of a boiler I...

Many thanks to you both for the helpful replys. The problem started when I changed the thermo couple, I some how managed to move the pilot tube and there ensued a leak. So I tried to tighten the back nut to no avail, so I removed the tube from the pilot burner and cleaned up the injector, re...

Hi every one newb here with a question I have a Myson Economist and have a problem with the pilot. It is infact the injector shot. does any one know if these parts are still available ( boiler is about 18yrs +) Brian :?: