Search results

turning the mains supply off to the boiler did not make any difference will try the ev thing again folling it step by step will report back when i have tried it

the system works as it should i set the pressure when cold to 0.8 it reaches 3 bar when hot kicks the prv in when the ch goes off the pressure when cold gets to 0.5 bar the filling loop is dissconected and no water passing this has possibly been the problem for at least a year but it was ok on...

its still the same

hi no water came out of the tyre type valve and the system was drained down prior to checking the ev

hi i have done that the baxi book says minimun pressure should be 0.5 bar mine is 0.55 is this ok thanks

hi to anyone that can help the above boiler has had over the last 2 years every part changed and i even have a boiler for spares my wifes dad is a plumber but old school so he dont know a lot about combis over the summer everythings been good hardly any pressure drop now the winters here and...

right work this out to go with the problem the machine is plugged into the socket turned on the machine is off it starts to do a normal wash nothing shows up on the display panel until al03 can anyone help

can anyone help on this matter i have the above and a error code al03 has come up i searched the net and it suggested the pump or drain hose was blocked both of these are ok i did notice that the impella on the pump did not move freely is this ment to as i dont know when i put it all back...

thankyou johnd

hi has anyone got the manual for this cctv i have lost mine thanks

can you tell me whats in this seal kit im being told its about £60 thanks

thanks i am pretty confident and will give it a go thanks for your help

yes they do the diaphrams are both ok in the dv

hi the above boiler has a problem in when turning the h/w on the c/h on the diverter valve kicks in as well even wheh the switch is set to h/w only i have cleaned everything i.e phe diverter valve out even the brass manifolds as well and its all clear any one any ideas

5544 you got it right it was the heat exchanger which had a blockage in it thanks for your help

hi everything was done and correct i have justed flushed the system out and repressurised and have now noticed a leak upon investigation i have found the pipe from the diverter valve has been kinked therefore its now leaking i now think this is the problem hopefully

hi over the last 18 months this boiler has had every major new part the last being a external expansion vessel about 6 months ago i noticed the other day thumping noises when reaching 2 bar pressure when ch is on looking outside at the overflow water was comming out (trickle and hot) when...

hi all managed to pop it back on without having to strip everything out if it happens again i now know what to do

yes it is a ball and socket i cant seem to push it on

hi i have the above van but the wipers do not work upon investigation the right hand side arm has come off of the motor(under the engine) is this an easy fix it seems tight i can see where it shouls go but it did not deem to clip on thanks to anyone that can help