Search results

sounds like a plan, thank you!

Thanks both! Can I therefore sand it down very gently and then put on one coat of satinwood over the eggshell, without the need to sand it down completly? Thanks again.

Apolgies if this is a stupid question! last summer I painted all the door frames with the usal undercoat and the egg shell paint as the mrs did not want a "shiny" look that gloss gives. Now some of frames look very dull! For these can I just re apply another coat of egg shell, or do I...

Thanks. We have fan already installed which come on when the lights are on and stays on for a while after the lights are turned off..... Having the switch outised the door is not an issue, I guess what might be is the fact that there is not a timer, eg you want the bathroom to be warm...

Hi All, I had a chrome towel rail installed in my bathroom last summer.... No surprise you may say, but was freezing in there over the winter :cry: to the extent that with young children, I want to get this changed. bathroom is quite big, with a walk in shower in one room...

Thanks, told you if was a numpty question! Thanks

Thanks. Makes sense re the overflow pioe hole as the system was updated. So I am assuming I do no need to worry, my only concern was that I am losing heat and that defies the whole point of insulation? But I do not want to get any work done if I do not need it I guess... Thanks

Hi, I don't have any photos. but yes. One hole which I just boarded up with a small piece for temp fix was actaully in the board itself - wierd as it was a perfect circle and I could see the whole back gardn from the loft..... The other smaller whole where light is creeping in are as...

Hi, Apologies if this is a numpty question, I went up into our loft and I need to insulate as its all old insultaion etc... However along the front of the house and back of the house side, I noticed small holes in that the light was coming in. One was huge in that I could see the garden -...

thanks. Yes it was done by the installer. Vaillant were sent the warranty papers. Only other controllers I have is a room thermo, and as mentioned the two on the ect tec plus, and of course the temp gauge on the UNIstor. :cry: cooncerned now..

Its a long story but basically the work is all new (i was involved), it is coming upto a year old in June, when I am assuming I will need to get it serviced by Vaillant so that the 2nd year of the service will be activated. I will ask the engineer when he comes, but I am concerned as it did...

I had another post where I was trying to understand how this system I inherited works. I have one question please which I would appreciate if someone could assist with. On the 637 there are 2 dials, one for water temp one for rad temp which is set according to seasons and generally how hot...

Hi, House is 4 bed semi with two bathrooms, each with shower, one with a bath and a toliet downstairs. We do have times when both showers are on and washing is being done, but more like one shower and another appliance eg washing machine.... at the same time is more common. Could this...

Thanks once again. The rads are less than a year old, so I guess I have concluded: Leave the top HW temp as this is controlled by the temp setting on the uniSTOR and use the rad bottom temp button in accordance with seasons and in the book or basically how hot I need them. Thank you...

Thank you both for your assistance. There is no VR65 fitted. All I have is a honeywell room stat and the drayton control programmer. You say to set the bolier stat to 5 degrees above the unistor set temperature - assuming you mean the bottom knob which controls the temp of water...

Thank you both for your assistance. There is no VR65 fitted. All I have is a honeywell room stat and the drayton control programmer. You say to set the bolier stat to 5 degrees above the unistor set temperature - assuming you mean the bottom knob which controls the temp of water...

thanks will cahnge the setting. I have a uniSTOR 260 and the eco tec plus is a 637. Many thanks for your assistance.

Hi, I have the eco tec plus boiler and unistor cyclinder. Hallway has a room thermostat and most rads have trv's. My initial question is to check that I am using this how I should be. water: - temp is set on the unistor currently at 65c - question is that on the bolier there is a gauge...

thanks for your reply and advice. To summarise, the water temp on the bolier can be turned right down as the temp setting on the unisotr (65c) controls this? The temp dial for the radiators on the bolier purely heat the water which is sent to the rads, so to save money I shld not have this...

Yep thats them, with the level on the side saying Auto or Man... Thanks