Search results

I did a continuity test on the stat and it bleeped, so it was calling for heat. (circuit made).. Thank you for helping btw,

Hi everyone My mate has an old hot water tank, heated up by an immersion. He's getting no hot water today. I have checked the stat hasn't tripped, and tested for continuity and the meter bleeped. I also tested the resistance of the element itself and the reading was 19.6 Ohms. The neon...

Yeah thats the one, the triton ivory. I am not sure though about doing the test - there seem to be loads of wires inside! When you say with the power off, do you mean just the pull cord btw?

Hiya, I can help on this one (I think)! - with a combi, you will need a wire from the combi terminal strip to the programmable room thermostat, as you say, you may not require the neutral. So just use a 2 core wire. Yes the LIVE to the programmable rookm thermostat is also known as a...

I am not sure what part I would do the test on, I haven't done one before on a shower. I have heard that an electric shower that lasts 5 years or so is good and you are better off replacing them when they go?? I think mine's easily 5 years old, maybe longer...

sorry, yes when on its normal setting, which is usually hot!

An AAV may be required here, I have heard of this problem before with maxerators. If the waste runs steep from the unit and at a lower level, then trap seal is lost through self siphonage

I have a Triton - Ivory electric shower (is oldish) For some reason the water is very lukewarm now, if hot at all. Was wondering the reason and if it can be repaired or a new shower unit would be required?