Search results

hi, thanks i have feeling iam going to find the problem in the last place i look thanks again

hi, i have a reading of 230v on the incoming supply to the contactor but it will not close so iam getting nothing on the other side thanks

hi, yes the number is 16025 thanks

hi, no replaced with the same contactor as taken out,hich i have been told worked for some time any reason why they fail would be a help thanks

hi, yes it is commercial electrical installations tested the supply voltage at the contactor and that ok the site electrician told me the time switch was ok, told that this just for the light contactor but now iam not sure

hi, yes perfect there is no problem with the lights i have not had much time dealing with these contactors and iam following up from someone else when i first got on site i was shown the 63amp contactor which did not have the red indicater showing then the 25amp lighting contactor...

hi, i will have to check where the 24v supply comes from but it will have to be from the board under the said unit as there is only 2 boards thanks

i have just been told the timer feeds in another multi 9 25amp contactor which controls some lights i have noticed the cables from the timer to this contactor the incoming supply to the 63amp contactor is from another larger board under the said unit a 32amp switch thanks

yes there is a timer but i have been told that this is ok its a merlin gerin timer and they dont have the instructions for it and i dont want to start changing things could this be the problem

the contactor is a 400v with a supply voltage of 24vac i replaced the contactor as found as this was working upto a week or so ago and everything is the same also looks like it feeds form a 32amp mcb from another board and power is getting to the contactor do you know where i can get a...

Hi, i have been asked to replace a merlin gerin ct2000 ie 63amp 400v contactor within a board which controls a few tv type screens with a small shop, i replaced the contactor and have the in coming power to it, but it will not contact and send the power on i have checked all the screws...