Search results

Much appreciated, part found!

Does any one know of this company. Been to see a whirlpool bath with a thermostatic cartridge issue but can't find anything about them on the web. Any help about possible part suppliers would be appreciated. Mark

Cheers guys, All sorted now, trial and error as it happens, gave my dog a real shock in the process but worth it in the end as the wife can do my washing now. I'd have asked the guy from my wife's work to help but he's a boring pr**k, much more fun getting advice. Mark

Guys, I wonder if any of you could offer me some advice? My module has failed in my Hotpoint WML760 so I've sourced a reconditioned on. With the board came a note suggesting I check the motor for earth leakage. I've managed to borrow a Metrel Easitest from my wife's work but need advice...

Many thanks to all you guys. Just to clarify would you therefore suggest that a fused switch is ample for my needs? Mark

Thanks for the advice. Possibly as simple as that too!!! With an RCD on my consumer unit does that mean I can just use a fused switch instead and still have the protection I want? Out of curiosity, if I plug an extension lead with an RCD plug into a plug socket and press the test button...

Hi guys, I wonder if any of you could give me a little advice, I've installed an IP66 rated socket in an outhouse adjoining my house. This is fed from a Safetysure RCD spur, wired as a spur from a double socket next to it. When I turned my electric back on at the consumer unit the external...

Guys, Many thanks for all your advice, the bypass had crossed my mind however I thought I'd tested this theory by putting one of the motorised valves into it's manual position and letting the system run, the lockout occurred again so didn't think that this was an issue, I also reinstalled the...

Pump valves are definitely fully open too. Mark

Sorry, That should have been both indirect. Obviously didn't proof read as well as I'd thought. Tapping size is 1", not sure about the coil but can get info from the new cylinder and cut open the old one, I doubt it's related though as the fault occurs when there is no demand for hot...

Hello all, Sorry in advance for the long post, but I hope a lot of detail will help you help me! I'd appreciate some assistance from you experienced guys with a persistent problem relating to a heating system I've been working on for a customer. I recently fitted a indirect cylinder for a...

Guys, Many thanks for all your comments, I'll follow your advice, was hoping to do a favour but in this case I'll pass on it! Yours, Mark

Guys, I wonder if you could offer me a bit of advice, been helping my friend with his heating system lately and got a call this evening to say that his combi has suddenly broke down, I went to have a quick look thinking it would be something and nothing but am at a bit of a loss as to the...

Am I right in thinking that I could get a normal Magnaclean and put it inline with one of the hoses from my CF90? Mark

I've always found the hoses a little cumbersome but I suppose they're going to be with such a wide bore

A Lightning fast response, thanks for your thoughts! Seems loads to pay for the Combimag, can't seem to find anywhere on the net offering it any less though!

Guys, Have a Kamco CF90 which is great however I've noticed that there are a couple of attachements that might be worth adding! I'm looking at the Combimag and also the Radhammer, I did have a similar attachement for my SDS but this went walkabouts earlier this year. What I'd like to...

Thank you for the great posts, I'll try and keep you posted. Mark

From what I see the boiler should operate correctly under these conditions, this implies it might be one of the thermistors or the pcb, please don't quote me on that though but it might give you something to look at. Mark

Nice one, I'll give it a try. Is it fast acting??