Search results

So Its interesting. We ran the shower for nearly 10 minutes and the boiler kept running without cutting out but was modulated to (presumably) its lowest setting. I haven't rechecked the flow rate but it doesn't seem any better. However after my last post my wife took a (longgggg) shower and...

It was also good to get an engineer that really knew his stuff. Every question I asked him he was able to answer fully. Just looked up a new flow switch and its around £135. I think its time for a new boiler........ (that was his recommendation as well).

Hi Jonntheo5 - I never got around to doing the additional tests, however a Worcester Bosch engineer came today and changed the flow switch (thankfully I have a maintenance contract) - problem cured. I ran the shower before he changed the flow switch and you could see that it wasn't operating...

If it makes any difference the expander is version 2.0.0

Ok so I went through section 5.3 and ended up with 'All Devices Deleted'. I then used the Ricochet learn menu starting at device 09 for my door contact and put battery in as soon as the countdown began and it just counted down to 0 and failed :( . I admit I didn't put the expander into...

Thanks - I may try tonight or leave it to Thursday as am away. I downloaded the new app but it needs an installers id to use. I am sure on a previous chat with Texecom they said that i would be able to use the app. will see what they say......

Excellent - thanks that worked. Final (big) problem is finding out why I cant learn my devices.

Looking on the Texecom page that seems to be the latest version?

I'm using 8.1?

Hi, I've been out most of the day but finally got around to looking at this again. I have now managed to connect to panel using laptop and Wintex on Com Port 3 (thanks secureiam). I uploaded all of my previous data and I can now see the GUID and also generate a Texecom Connect App Code...

Hi - thanks for response. I will try defaulting wireless expander tomorrow. I do have the extra adapter that came with the smartcom but thought that was only if you needed an extra com port as the smartcom takes both com ports 1 and 2. so are you saying to remove smartcom from com 1 and com 2...

I also tried to connect Wintex on a laptop to Com Port 1 by taking the Smartcom connectors off and using the JAC-0001 lead (that id successfully used to flash the firmware). I got a com port error, so no luck there. I also thought i'd see if we had a uniquie GUID on the keypad but that just...

I have a Texecom Premier Elite panel that was at software version 2.x. I decided I wanted to be able to use the new Texecom Connect app and so decided to do 3 things: 1. I bought the cable and flasher interface to enable me to use my laptop to upgrade software to firmware 6.2. According to...

I was going to use a Worcester accredited installer (the same one my daughter used) and I'm pretty sure he power flushed the system prior to installing the new boiler. On a different point (and as I'm still paying for Worcester Bosch boiler insurance) I've arranged for one of there engineers...

Thanks - yes it helps to make the (expensive) case for a new boiler

Hi, No I didnt have the system powerflushed and I dont have a magnetic filter :(

I'm thinking that as my boiler is now 17 years old and the maintenance contract is nearly £40 per month, I'm thinking that I'd be better off buying a new Worcester Bosch with their 10 (or in some cases 12) year warranty that only requires a £100 service per year to stay within warranty terms...

Thanks - the heat exchanger was changed 12 months ago

Thank - ill try next week

Hi - Yes we did this this morning. I didn't measure the temperature of shower but it seems to be working like this although there is a cut-off when I reduce the shower temp too low the boiler starts cycling again