Search results

See I'd say if you can get overflow pipe to the drain, then I'd look at fitting a saniflow for the washer to pump in to and let the saniflow take it to a drain. After all its designed for that sort of thing.... ?

Inter gas eco rf 10 year warranty

See I would just go to b&q and get some stainless steel m8 nuts bolts and washers... Jobs a goodun !

Humm, am presuming the titles are vertical on the front of the house. I have used 2 ways to get the discard out... 1, mark the tile from inside, push the tile froward and remove the tile then drill it on the floor, refit the tile , stick your blow off out 2, 25mm diamond core bit and let the...

I think all efficiency ratings are bull same as car mpg, its all lab tested and leaning towards the best results of a manufacturer. I know people knock intergas but I've fitted loads of them (yes they look dog ugly) but I've never had one go down and customers love them.

can be done but i wouldnt id have plastic coming up use a push fit coupling to copper above the screed, so there is no joints below the screed

fault code says Lack of burner ignition (no ignition signal from the full seqence ignition device) so id say spark electroide or condensate trap is blocked / full, you will need a gas safe lad to look at it with it being on the burner side and condensate being part of the flue

there is prob a leak internal on the boiler place a dry bit of cardboard under the boiler and see where its dripping from

how big is your heating system ? check the prv isnt passing and the expansion vessel has the correct charge in it

yeah wrap it round it make sure its wet wet not just damp been doing it 17yrs Ive personally not had a problem using that method

put a wet rag round it and keep heat to a min when soldering if your concerned about it use a compression fitting

sweedens been using them for ages they are really good kit. If it was a large one on a farm or commercial property its prob around 199kw its so they can claim the big rhi and that last for 20 years not 7 like on the domestic the rhi on commercial work out around £10 for every £5 you burn in...

17 k is tad ott its pritty new tech over here to us, but its proven abroad been out for years over there. the thermo store size is dependent on the size of the house and kw of the boiler don't be put off by the tech have a look at this one...

air source is good and works well underfloor heating wants to run at 45~50c tops the thing is you cant stick a heat pump on to old rads that was on a gas boiler they are undersized for a air source pump and designed to heat the room at 60~80c flow temps.. i read a post about some one having one...

Get a biomass boiler and get paid to heat you home via rhi.. gas is around 4.4p oil is about 5.8p and lpg is about 6.8p per kwh to run biomass is 4.4p per kwh for wood pellets but the government pay you 12.2p for 7 years there is a £2000 grant towards the install of it. After the 7 years your...

like nipper39 said .... spot on lad !

dose the central heating work ok ? is the boiler making any kettling sounds ?

hello the woman inside has decided she wants to get rid off the back door and fit french 1's :roll: at present we have a open window a non open 1 (all 1 unit) and then the door.. but being a nasty ex council house the frame covers top to bottom no brick wall below the window just a pice of...

cheers mate, just done it an looks the part, see if its still up in mornin :lol:

i need to board over the slope on the back stairs .... how the puck do i attach the new board over existing board ? i was thinking of bonding and screw the boards together??? help :mrgreen: