Search results

Thanks John, it was dead awkward to explain for me too lol Will fiddle about a bit and let you know how i get on. :D Cheers

(not to unblock the sink but to control the plug) Hi Could someone guide me through the correct way to fit the rods so that the plug plunger will work correctly please. I have a rod that allows the user to control the plunger, a rod fixed to plug itself and two connectors that fit to...

Hi Took the PC to the local (independant) shop and a new motherboard is being fitted tomorrow. Thanks everyone for your input. Matt :D

Cheers all, will clean it off and replace the paste Cheers

Hi all Just fitted new (boxed retail) PSU but still the same original problem exists. Does this mean it is the motherboard? Frustrated been 3 weeks now no PC just old laptop Cheers

Hi If i remove the cooling fan from the Processor do I have to replace the heatsink paste or will the existing paste still do the job? Cheers

Hi me again. Ok the phone line does not connect to the PC, it is located down stairs in the hall and I conect to the internet via Wireless to the router. I have got hold of a Thermaltake DR Power PSU tester, Part No A2358. I plug in the P1 connector and all the green LEDs light up with...

The green shows 4.1 volts when the cable is in the rear of the PC and switch at the rear on the PSU is on. Immediately the power is applied using the button on the front of the PC (power up) the voltage drops to 0 on the GREEN only the rest show the voltages as per the first post on here...

Hi and thanks for the replies. Firstly I don't know if this is relevant? PC was switched off Sunday evening, on MOnday we has a brief thunder storm ans later that day was when the PC would not start. The PC was connected to the socket on the wall. Could this have been the...

The problem is this. 1. All cables connected, power at the wall socket on and switch at the back of the PC on the power supply on. 2. Press power switch on PC case and it lights, but no HDD light illuminates. 3. Power down and opened the case and re-applied the power and observed the...

Thanks to everyone i got the engineer out and it is now fixed. The Capacitor was u/s and replaced in 15 mins. Thanks again for the help. Matt :D

OK everyone thanks for the help. The boiler flashed up no problem this morning but will get the engineer out tomorrow. Thanks Matt :)

DOH :oops: Silly me!! The model is on the service sheet - it is a Boulter Camray 3, it is floor mounted and in the garage. You say kill the power, i guess switching it off at the consumer unit is good enough, will give it a go now. Cheers

Hi all I thought I would give it few days to reply, to give me time to track any trends as to when the boiler fires. First of all I don't know the model, but I know it has been here since the house was built in 1993. We have been in the house since 1996 and it has been serviced every year...

Hi again No it was a full service the guy arrived at 1000 and departed at 1140, he replaced a couple of items all included in the price. It it is the same engineer that has been doing the boiler for about 5 years, i think he is a good one on previous experience. The emissions etc are as...

PostPosted: Wed Oct 28, 2009 4:39 pm Post Subject: Does the boiler get hot and then not keep going, or is it from cold that the problem starts? Cassius66 - The problem only happens from cold, this morning neither the heating or hot water came on, this afternoon the hotwater did not come...

Hi hope someone can help... The above boiler is not firing all the time here are the details 1. Periodically the boiler will not fire for both hot water or heating. 2. When timer is activated on the timer/control box I can hear the system click on and also hear a "tick tick" from the water...