Search results

Not to sure about the ohm stuff TBH but i use these to switch between speakers / audio sources http://www.cyberselect.co.uk/audio/wall-mounted-controls I have a TV in the bath room and a Sonos Amp running into a stereo single speaker mounted in the ceiling. I use QED WM19 to switch...

Just to let every one know, i brought a new Porta nailer and it is miles better than the Tongue Tite Screws that i tried. Thanks for all your replies :lol:

Got to lay some 19mm thick 140 mm wide rustic solid oak floor boards onto a brand new 21mm thick french pine floor boards. Taking the time it takes to do the job out of the equation what would be best A Porta Nailer or the Tongue Tite Screws ??

Sorry but there are no prices or any info on what lengths the wood comes in. This is going to sound like a dig and it probably is, but your mo is always to put down others to try and make your product look good. But then you don't back it up with information. I also find your web site...

I took the photo last year; i have now changed the windows and put a door frame in, been and picked up some 9mm best ply and some 25x50 tanalised lath today so will get on with fixing that on. The cladding will not be delivered until later on next week and i have got to treat it first anyway...

I live quite rural so wanted to keep it “in keeping” with the other out buildings, also i quite like the part brick part timber look :D

Again thanks Woody for your help, do i still use the breathable membrane? if so where Before i fix the ply to the studs ? Thanks believe it or not there used to be a green house there and i was going to knock the wall down but i had a flash of inspiration and thought i could use the wall...

Thanks Woody for the Reply, Not too keen on OSG don’t have any reason to dislike it but like working with ply better. What thickness ply would you recommend? 12mm or 9 mm or thicker? and would normal sheeting ply be ok or would i have to go for WPB type ply

Wonder if i can get some advice please. I have built a new shed using 100x50 stud work on 400 centres and i am about the start the cladding stage and this is where i am unsure. My original plan was to 1: staple a breathable membrane on the studs and then fix the cladding onto the...

Work On The Outside of the house

I am seeking a refund and will email them to inform them so, and not a credit. I run a few E-com sites and well versed on the DSR rules :lol:

Hi there thanks all for your replies. Right been onto Y3K free support that you have to pay 10p per min to call :roll: and kept on hold for 10 mins before i get to talk to the tech, cut a long story short they are going back to them for a credit. So now onto where i can purchase some...

Thanks for the replies, though i would take a snap shot of what they look like. Day-Night Are they really this bad at night ??

No misting in the daytime, i have another camera which is a Samsung non dome type, like you say with the leds around the outside and that is fine dunning the night time. I just don’t get why make / sell a product that does not work :!: :roll:

Hi there, i have a few issues with 2 dome camera i have installed onto my system and wonder if anyone could offer some advice? The problem is at night time the screen just goes all “foggy” and you cannot see at all, during the daytime they are very clear. When i take the outer domes of the...