Search results

probably not worth the time it took to write this post but thanks anyway “big all”. thanks all for your comments guys I have a heating engineer coming to have a look today I will report back

Pressure is showing 2bar while it’s running

I’ve just discovered that the copper pipe leading outside from the boiler is dripping.. could this be a clue to why I have no circulation on the downstairs rads?

Yes jack all values are open and tvrs are good

All 15mm

Already tried that half do warm don’t go as hot as upstairs and only half warmed up.. maybe 5 of the 12 downstairs

Ok guys here’s those codes are saying D.0 37 D.40 71 D.41 63

To be honest I’m not sure how I would take that reading on the index. If what you have explained is the case what is the best option to try? Is it a new boiler or can I install a external pump? House is Baltic downstairs

not sure what that is where would I find that info ?

Cheers for the replies... The flow temp is between 71/72 degrees C

Is the flow temp what is displayed on the boiler? Or the temp of the flow pipe coming out of it?

1 room thermostat

Thanks for the reply muggles The house is very very draughty , the rads aren’t oversized at all. The boiler is continuously burning but I put this down to the thermostat not hitting the desired temp meaning the boiler would keep going... All 12 rads upstairs have had the lock shields closed to a...

Hi chaps/chapesses recently moved into a new house and the boiler is struggling. It’s a valiant ecotec 637r 37kw I think on a system system (we have a big water tank next to the boiler downstairs. The boiler is approx 14 years old. the house is over 3 floors 23 radiators 1x bath 2xshowers The...

ok cheers I'll have a good rummage. it's definitely not on show

Hi thanks guys, this may be my problem, it looks as though it hasn't been wired with one. It is a direct feed from my hood to the consumer unit. After realising this i have disconnected it from the junction box it was connected to, stuck a plug on the hood (so i can use the extractor via an...

Hi delmel By FCU are you meaning the consumer unit or the Fan Coil unit in the Hood? if the later the hood is working, i've plugged it in to a extension on another plug and have it working through the alternative power source. - both fan and lights are working fine.

Hi thanks for the replies guys. I have traced the hood power cable back to the FCU and the switch has not tripped. As described the hood shares it's fuse on the FCU with a pair of sockets that are working. That's what's confusing me.. Do i have to unscrew the individual fuse from the FCU and...

Hi guys, I have a similar problem her. My hood has stopped working, lights / fan. i've done a little investigating myself and found out that the problem isn't the hood, its the power supply from the spur. I've plugged the hood into another socket with an extension to confirm this. At my...

Hi Chaps/Chap'esses Going to attempt to do my hall landing this week, just in time for Xmas but need some advice. The walls are red, a deep crimson red (don't ask), I want the walls to be either white or an ivory white. Obviously it's going to take a few coats to get rid of the red...