Search results

We've had a new Logic plus combi fitted, the hot water is set to 50 degrees but when turned on comes out a lot hotter at around 60 and gradually cools down to the correct setting of 50. I've watched it doing this on the boiler display too. Is that normal because it's worrying that the...

Hi, Several months ago I painted the ceramic tiles in my bathroom using Zinsser bullseye 123 water based primer, followed by two coats Zinsser perma white interior eggshell. It's solid and held up perfectly almost everywhere, including where it's constantly saturated by the shower. There are...

Thanks for the info!

thanks, and the undercloak I just rest half on the roof timber and half over the edge, held in place by the battens? Then fill the verge with 3:1 sand/cement?

thanks Terry what do I need to ask for when ordering the tiles, i.e. x amount of plain tiles, and x amount of half tiles?

Hi, I'm going to attempt re-roofing our porch/canopy roof. Battening should be OK with and fixing the plain clay tiles but are there different size clay tiles needed at ridge/eaves level, or do I just just them? In the photo shown below (not my roof) the tiles at ridge level are shorter. I've...

Thanks for the replies. The fault was an earth fault by water backing up in the boiler and shorting out the cabling.

Hi, I have a new installation. The power went to some circuits the other night because the boiler tripped out. The RCD switch on the CU flipped, that's all. The downstairs lighting went off, but upstairs lighting stayed on. The ring main upstairs went off but downstairs it stayed on. The boiler...