Search results

sorry to be the party pooper but knowing the punto 1.2 around that age, afraid you are looking at the head gasket gone, not a massive job for someone who knows what they are doing, but that is why the fan doesn't work. compression/air getting into the water system causing build up of pressure...

just go to the official ideal website all the downloads are on there for all their different boilers, i have a isar he 30 and you can view everything about it, operation, installation, tech info,

cut off mains water and turned on hot tap overnight, still leaks overnight, deffinately condensate, the shelf is deffinately wet in the morning and the two grommets for the return pipe and wiring are both filled up as well, have read somewhere about sumps corroding through is this a...

sounds like the courtesy light switch has collapsed, that's what should be in the hole, but you may have to get to the back of it to find the wire what goes on the switch. if you can it's a straight forward job, get a new switch, connect the wire or wires to it, and put it in the hole, it might...

I don't think it's rain water, there's no signs anywhere of it getting in higher up or any tell tale marks, it seems to be so consistant too, 2 pieces of kitchen roll folded over and it's soaking wet, no more on the work top, but also no less, whatever the weathers like outside

looked at the heat exchange and all seems dry around it, got up this morning about 7.30 and the kitchen roll that has been under all day (dry) is absolutley soaked. there seems to be signs off water on the shelf under the sump inspection plate, and it looks like it,s coming through the retaining...

if it's the front side light, it's easier to take the headlight out, there's only two like metal clips you just pull up and the headlight comes out

i'm not sure what you mean with the plate hex rubbers, do you mean on the bottom corner where the drain pipe comes out, there's also a retainig plate covering it with two screws in it, (nearly 10.30 bedtime, and no leak so far)

i have a 52 plate tdci very common thing on the tdc flywheel gets worn and sheds filings everwhere, these get into the starter and beggers up the starter. can put a new starter on but it won't be long before it's doing it again, if the engine sounds very chattery on tickover the flywheel...

thanks tony, had'nt thought of that, the gauge seems pretty stable and not dropping, but will try closing the cold water to it and open the hot tap at least that will eliminate the supply water. as i speak now the paper is under it and i have been in all day, the heating is on cos it's...

hi guys, new to forum but you people have been an absolute god send over the passed few weeks, you guys are great with info so decided to come and join, and you never know, now i have stripped and carried out numerous jobs thanks to you fellas, i may be able to pass on any information i have...