Search results

No I was just ignoring you because you were ready for an argument right from my original question and are just an idiot Sorry to dissapoint but the work was completed and certificated yesterday by the electrician and he was very impressed with my joints and the enclosures!!! I don't...

I am installing the cable and the electrician is going to fix consumer in the garage and connect up to house main, test and certificate etc...and before you say it as you always do...The authorities have been notified So please inform me of when I lied!!!!!!!! [/b]

ok point taken better to be safe hand sorry!!! Piranha nut on the gland, then earth wire into my existing earth wire joint in the enclosure.....

The only reason I used SWA Cable is because of the outdoor environment, not right to T&E outdoors but mechanical protection, surely is unnesessary. Can you tell me what could possibly happen to a cable which is clipped to a wall, visable and out of reach

The SWA is clipped to a wall 3m above the ground so is not going to be penetrated by anything metal, so did not think it would require earthing?? If it does, can an earth wire be connected from the earthing ring on the gland into the existing earth joint in the junction box??

3 core SWA

Yes it is a garage consumer, running two lighting circuits, two socket circuits and a dedicated circuit for a compressor. The protective device in the house consumer is a 40a MCB on the rccd side of the unit

Hi I am doing a joint of 10mm SWA to 10mm T&E using an IP66 60a junction box My concern is the earth core joint, as the core is larger in the SWA than the T&E so my question is; Should I run an additional earth cable from the consumer unit to the joint, to address this problem and...

If you had all read my previous posts, I said I am well aware of the regs and what is involved legally. I thought this website was to offer advice!!!!!!, I asked a question regarding Cable size, not to be told what I am allowed or not allowed to do Thank you to RF Lighting and Love...

Are you just on these forums to be obstructive???. Having read many of your posts, you just try to be negative rather than helpful :x I am well aware of the regs and that the work is notifiable etc etc, you keep banging on about it in most of your posts. I will be employing a...

It will be mig welding

Hi I propose running power to a garage and workshop using SWA Cable This will power a total of 7 twin sockets, four flourescent lights and three standard light battens. and the workshop will do occasional use with welding equipment. I was just wondering what size cable you...