Search results

  1. I

    Ultracom 38cxi and Drayton Wiser thermostat

    I've added pictures to explain it better.
  2. I

    Ultracom 38cxi and Drayton Wiser thermostat

    Hi I want to fit a Drayton Wiser smart thermostat to my Glow worm 38cxi boiler. Is this wiring correct? Terminal 1 on Wiser to 24V on boiler Terminal 3 on Wiser to 0V on boiler boiler wiring - http://gofile.me/3v747/z63hlwSYC wiser wiring - http://gofile.me/3v747/VPl40qgi5
  3. I

    upvc door hinge repair

    Thanks Gazman. I will get some screws and give it a try.
  4. I

    upvc door hinge repair

    Hi The top hinge on my shed door has come away from the frame (see attached pic) What do I need to do to fix it? If screws are needed what type? Thanks for help.
  5. I

    Is this a safe feed to a shed

    The cable armour is not connected from what I can see inside the junction boxes. It's just the 3 cores from the SWA connected to the 3 cores of the flex. I'm not sure of depth for the SWA as it is all under slabs.
  6. I

    Is this a safe feed to a shed

    Hi Is this electrical feed to a shed safe? A double plug socket inside the house has a plug in RCD connected to it. From this RCD a short 2.5mm 3 core rubber flex cable goes through the wall in to a waterproof junction box mounted outside. Inside the waterproof box the flex connects to 2.5mm...
  7. I

    block shed on slope

    Now I understand :D
  8. I

    block shed on slope

    Sorry, I'm being thick so bear with me please. I understand that it's 2.5m max height from highest ground so in my case I'm building on a downhill slope. The front will be 2.5m high and as long as I keep a flat roof will I be ok as the rear wall would be more than 2.5m high as it's starting...
  9. I

    block shed on slope

    Thanks Freddy So having max height of 2.5 m at front and 3.3m at rear will be ok?
  10. I

    block shed on slope

    Hi My garden slopes downhill away from my house. I want to build a block shed at the bottom of my garden. It will be about 4m x 5m and will go up to the fence on both sides. I've looked on the planning portal website and it mentions that any outbuilding within 2m of the boundary must have a...
  11. I

    lawn in front of block shed

    Hi I am shortly going to have a block shed built at the bottom of my garden. In front of this will be grass that slopes down slightly towards the shed. In the case of heavy rain could there be a problem with water running down and sitting against the block shed? Should I be doing something to...
  12. I

    concrete block shed

    Thanks for the detailed advice. It has given me the information I needed. The shed will be used for overflow storage from the house so food, clothes and all sorts of other items! It doesn't need electrics The first quote I had the builder mentioned that he could do a single block shed but...
  13. I

    concrete block shed

    Hi I'm getting some quoted for a 3m x 4m shed to be built at the bottom of my garden. What should I be looking for in the quote? I want a shed that doesn't suffer from damp. Is concrete block even waterproof?
  14. I

    Flickering

    Hi All. My electrics all seem to work fine apart from a minor niggle. I've noticed that on all extension lead with a small neon light, the neon light flickers all the time. Also putting a mains tester screwdriver anywhere the small light in the screwdiriver flickers. Is this...
  15. I

    32" x 78" door

    Hi I need a 32" by 78" white moulded 2 panel door but no one seems to stock this size. They only have 33" x 78" or 32" x 80" Can these doors have 1" taken off the width or 2" off the height?
  16. I

    Gas cock nut

    How tight should this nut be as when I was turning the gas feed to the cooker off I noticed I could easily turn it by hand?
  17. I

    Gas cock nut

    Hi I have a gas cock that looks somewhat like http://www.bes.co.uk/product/27~NG~420~420~-End-Feed-Capillary-Gas-Cocks.html It has a nut on the bottom with a spring above it. What does this nut do?
  18. I

    2" x 2" batton screw size

    Hi If fixing a 2" x 2" batten to a brick wall what screw size should be used? It will be used to support the back edge of a 800mm shower tray.
  19. I

    shower tray and enclosure questions

    Thanks. If I don't want to cut tiles or anything like that does that mean I need to find a tray with no tiling upstands?
  20. I

    shower tray and enclosure questions

    Hi Will there be a problem using this tray in a bathroom that is already tiled as the tray mentionst iling upstands. http://www.plumbworld.co.uk/coram-coratech-corner-shower-3171-17910 Also, wil this enclosure fit the tray ok...
Back
Top