Search results

I think that too. Perhaps the display is working off the internal battery but the internal connections of the timer have had it. I will stick an FCU in its place as a temporary measure to get some hot water and get a new timer tomorrow. Thanks for your input.

L-N L-E N-E

Fluke T5 voltage / continuity tester Not sure what you mean with the second question

Can you guys offer some help please. Im sure the timer is the issue but the display is showing thats its all working. Immersion heater timer is a Timeguard FST 11A Power to the timer No power to immersion heater with timer switched on Fuse in the timer is is showing continuity 240 volts power...

Have a look at this thread: //www.diynot.com/diy/threads/quick-fix-cooling-for-conservatory-roof-before-replacing.436866/page-2#post-3434772

You may choose to vent the void but I haven't yet - its something I am considering doing with 100mm vent cowl - I will most likely add 2 or 3 however if you use the multifoil insulation fixed directly to the roof bars then I'm not sure if you need them but you will have to look into it further...

The brittle plastic tiles you have look like a thing called a Prismatic diffuser - usually used with 600mm x 600mm "office" lights. The things they are resting on is called suspended ceiling grid. the grid comes in 2 widths (24mm and 15mm wide) If I was you I would take it all down and...

Stroma are £288 per year to be a member of a CPS - by far the cheapest out there.

Have a look at this data sheet from BG: http://www.gyproc.ae/pdf/Gyproc_Plasterboard_Adhesive.pdf It gives installation details of trowling on the adhesive and also the mixing. Granted it doesn't state what thickness the dabs will be though. Also google the following and it will bring up the...

British Gypsum state that 1no 25kg bag gives enough for 2 boards (2400x1200) Knauf estimate that 1no 25kg bag will do 4.6m2

My conservatory Floor space is approx 4m x 3.3m Cost wise (approx and off the top of my head) The Timber spaces are at 450mm centres Timbers - £150 Bolts and brackets - £30 100mm Insulation (doubled up) - 24m2 @ £2m2 (2 rolls) Plasterboards - £30 (1800x900x12.5mm) Electrics - £10 Plasterer -...

Untitled by adam1984 posted 13 Jun 2014 at 11:45 AMUntitled by adam1984 posted 13 Jun 2014 at 11:46 AM

Untitled by adam1984 posted 13 Jun 2014 at 11:46 AM Untitled by adam1984 posted 13 Jun 2014 at 11:47 AM

This is what I done to mine 200mm of loft roll in the void. Been up over a year now and its brilliant. Cosy in winter and cool in the summer, Untitled by adam1984 posted 13 Jun 2014 at 11:45 AM Untitled by adam1984 posted 13 Jun 2014 at 11:45 AM Untitled by adam1984 posted 13 Jun 2014 at 11:47 AM

Probably way beyond my capabilities! Thanks for the replies guys.

Just been looking myself at Lidget Garages. If you look on their website they should point you in the direction of one of your local suppliers / Fitters http://www.lidget.co.uk/

I know this could be a "how long is a bit of string" question but how much would it be to build a brick built garage? (attached to house) I live in Crawley, West Sussex I have a semi detached house with a driveway down the side so would like it to run the length of the house which is approx...

Have you balanced the radiators? I have had the same problem as you in the past and it was the rads needed balancing. How I do it is turn off all the radiator valves and turn the heating to constant and then one by one i open each valve a quarter of a turn. You just need to remember...

The tone of most of his replies follow the same pattern.

I can only assume Tony you didn't read the my post properly as your response is a pathetic. The system came with the house - I didnt get it installed. I will notch the joists myself as it wont cost anything - thanks for the tip about the felt. Im not replacing the boiler because its not...