Search results

dont know. i dont have manual anymore. the transmitter is an ID8 http://www.fan-light.com/product.php?id=60#login

the wall switch visually is on. i have not checked with a meter. what is the best way to test the switch? look for voltage drop across the switch in both positions?

yes

hi all, in my bedroom i have a ceiling fan with light. it also has a remote to turn the light on/off and to turn the fan on/off. the light and fan has all of a sudden both stopped working at the same time. my gut feeling is its the sensor on the light fitting which communicates with the...

thank you every one who has contributed to my problem . it turns out i had some hidden terminal blocks in my stud wall where the neutral was loose. all repaired and hob works ok now. once again, many thanks. keep up the good work in the forums.

a second voltage check at cooker switch shows LE 240v LN80v NE 0v

just doubled check my voltages. so at my hob i have L1, L2, L2 (Live) L4, L5 (Neutral) L6 Earth going from L6 earth to all over connections (live & neutral) i get approx 245v ac. between live and neutral i get 0v ac. also just disconnected my hob from cooker socket. at cooker socket i...

yes i beleave i have followed the correct wiring instructions. to be honest not very difficult considering they was a pre connected cable for single phase supply.

read through instructions several times, hob should give a beep when power is turned on, unfortunately no beeps can be heard.

hi, ive just renewed my ceramic hob with an indesit VRA640X. i've used my existing supply and connected to the pre connected electric cable designed for single phase. switched on my cooker MCB and nothing happens. the hob is suppose to beep and should turn on using the touch controls but mine...