Search results

OK, here are some photos - don't know if they are detailled enough. One side of the roof looks fine, the other side is flakey. ridge tiles have gaps in them. Any thoughts on the tiles?

Thanks for that, DAZB, I'll get some photos posted soon as the rain stops.... If I were to get a repoint done by a professional, what ball park price should I be looking at (weed out the cowboys!!). It's a mid terrace 3 bed in Gloucester.

Hi, I keep getting bits of mortar falling down my roof, so took a look at the ridge tiles. There doesnt seem to be any pointing between any of the tiles. they are the type that butt up against each other without that overlap i've seen on other roofs. Do I need to repoint them urgently? Access...

fair point... the consumer unit is a long way away and i don't have the skill to re route the cable or the cash to get a spark to do it. this is more of a quick fix, just want it to be safe. the switch was put in a cupboard by the previous person as the old switch is on the wall above what is a...

thanks everyone. i'll go and buy some bits today. cheers.

simiar to my last post, can i use choc box connectors to join cooker cable where i have removed a switch. a friend had this done by a builder (we took the panel off to have a look today as i want to do it) they looked fairly chunky ones and were wrapped up in insulating tape. would this be ok or...

No, even i know that is a no no. No, i'm not doing that, the path would be: consumer unit-old cooker switch(joining cable going to)-cooker connection unit in wall behind cooker- new switch in cupboard - cooker input. the only join would be where i take out the old switch. So in general...

Hi all, i'm wondering if i can wire in my cooker, or do regs require a qualified spark to do it? i'll need to take out the old switch and join the wires - i presume these will need to be crimped together with butt connectors (will they need a heat shrink too?), cover this hole with a blanking...

thank for the info. spacers... how long should they be? or does that depend on how big the overlap of the felt is? and how do i fit them? i'm clueless on roofs, i'm afraid.

I've been reinsulation my loft and noticed that there is a lot of condensation on the inside of the roof. (black felt type lining). I think the previous owner went a bit far and blocked up all of the eave space with fibreglass which i guess would have restricted airflow? I've managed to get most...

Here are the instructions Here is the light http://www.toolstation.com/shop/Lighting/Interior+Lighting/Quarter+Sphere+60w+Ceramic+Wall+Uplight/d220/sd3066/p30251 Do I need anything special, or just attack it with a normal screw and plug? Cheers.

Stuff from the house

been away with no internet (joy!) so apologies for the late replies. I'll get some pics up of the instructions today, so you can see the bolt thing. cheers.

Hi, Don't know if this is the right forum, but, Just had some ceramic wall lights delivered, but no fitting kit. They have two holes for mounting, but I can’t get a screwdriver in there to screw them in the wall. The diagram shows something that is put into the wall with a thread poking out...

Thanks all. I've found somewhere local that sells the red devil filler so reckon i can get it done this weekend. If only i'd known this before i spent ages pulling the things out! still, there are loads more in this old place to fill. Cheers.

oh. I've taken the plugs out now. i didn't think you could fill over them. I could put them back in, i suppose, and then knock them in a bit to fill over them. thanks for the help.