Search results

Im certain its from the mains as it has a very good pressure. Defo not gravity fed from a tank.

Im having an electrician to replace my consumer unit and instill and test cable within the house and new shower. Im thinking i could save a little of a tight budget by putting the new pipes to the shower. So your saying that i could tee off the bath tap, run along the floor then go up into the...

Morning all, Im currently fitting an electric shower and was wondering if i could tee into the cold tap on the bath supply for the supply to the shower or will i need to come from the main house supply in the loft.

i have also noticed that in the main bedroom where the mold is on the wall and celing that there is a small crack from the wall to celing and possible air from the loft coming through.. maybe this could be causing the mold as its possible that the mold is the other side of the wall. Worth a...

I have a ticket to say the windows are nine years old now. How would i know if the seals have failed, i would say some off them lets cold in the edges especially in the bathroom. but box room and bedroom seem fine where the mold is growing. I dry my cloths on a horse rail in the spare room no...

I have noticed that all my windows suffer with condenstation every morning the windows have loads of water on them. now and again the upvc frame at the bottom has had enough water sitting at the bottom to fill half a pint... I was thinking of getting vents installed in the windows but dont see...

house was only empty for a week, my gf cleaned all the windows and celings on the day we moved in so this has grown in 4 months really. I beleive its because the windows have no vents as they are upvc double glazed. Ill clean the mold off tomorrow. Are there any venterlation fans that can be...

Afternoon all, Myself and my other half have just got are first house. We have been here since october 2012 and have some mold coming around the windows and on the celing above the windows. The worst area effected is are main Bedroom where its around the window frame and on the celing. And a...

is it possible to have the hot water circuit and central heating going to one towel rail.

The rad is only on when the hot water is being heated and is used as a heat sink when things get to hot to protect the boiler... But is there a way of hooking a towel rail up to the central heating and hook up the hot water circuit which will be the heat sink. Therefore putting both central...

lol crazy ant it old owners have just made a mess everywhere but on this the bathroom door opens out into the landing.

Ok i believe my oil boiler located in the garage sends hot water to the loft where a valve changes its direction of flow to the central heating radiators or the hot water coil for the indirect water tank and one rad in my bathroom via a programmer in the living room therefore haveing 2 circuits...

Hello, This rad in my bathroom is being used as a heat sink when the hot water is being heated for a in-direct system. I would like a towel rail in its replacement is there any methods that i can have a towel rail to remain a heat sink for the hot water circuit and a central heating towel rad...

Afternoon All hope your have had a good xmas n new year. My bathroom currently has a 900watt ish Gravity feed rad in the bathroom that is plumbed into the hot water curcuit i.e. only gets hot when hot water is selected on my oil boiler system. Now im currently changing my bathroom and would...

Ok thanks alot for your help.

Its a floor standing boiler in the outbuilding which heats the c/h and hot water tank in the cupboard upstairs. I have had it on number two and it heated the rads correctly to the required heat. My only worry was the pump was rather hot to touch like toching the side of a kettle. In some...

Afternoon all, I have a wilo gold 50 edition pump, i have a small 2 bedroom house with 5 rads and have been having a few issues with air in my system. I bleed this pump this morning and had no air in the pump but i did notice that the pump speed was on 3 "max" and to me that seems rather high...

Ok brilliant thanks alot

Ok just an update i had no air come out of the pump this morning so i will keep an eye on that but i did have air again when opening that black cap on the air value in the loft. Could it be possible that this value is damaged. There must also be an air leak somewhere. The pipes and pump was...

i think i would like to change this rad for a towel rad thats mounted to the wall and use my oil heating to heat it at night with heating the hot water as its already on that circuit.. Ill then use E7 to heat water in the morning for her to wash her hair lol.. We only really need that bathroom...