Search results

Hi Guys, A family member of mine has a Bosch Condenser Tumble Dryer and the the tank fills but doesnt stop when its full. I'm guessing its some kind of sensor but I havent had a look for them yet, and was wondering if anyone has had experience of this? Thanks in Advance.

Has anyone not had any experience with this Issue?

Any Ideas?

Hi Guys I am hoping you maybe able to help. We have. Bosch Dishwasher and the bottom spray arm appears not to be turning. I have removed the arm, and there seems to be loads of pressure. The arm does not appear to have a blackage. Any Ideas? Cheers Laurence

Hi All, A friend of mine has a Bosch condenser dryer and it is coming up with fault code f11. I have read somewhere that this could mean a number of things, and at worse the main board could be a goner. Any ideas how to pin point what has actually gone? Cheers

Thanks for your response. I will take a look tomorrow, but the drum moves fairly freely. Any idea how this machine is easily taken apart, as I tried to remove lid earlier and it wasn't as simple as removing the screws on the back? Cheers

Hi All, We have a Hoover HNC 172 Dryer, which started off making a noice when running, and now when turned on it doesnt turn and just makes a humming noise, Any ideas where to start to try to diagnose the problem? Thanks in advance.

Hi Colin, Where can I see that from? I thought you meant the switch that is operated by what looks like a mushroom inside the machine? Apologies.

Do you mean the mushroom switch inside?

Hi Colin, I have joined the hose and its still doing the same (although it stops draining when door is opened now). Cheers

Ok Colin. I am working nights for the next few nights but I will take a look at the dishwasher as soon as the joiner comes. Have you got any ideas at the moment, because there didnt appear to be anything blocking the pipe earlier.

Fair Point. I have ordered one. Thanks Colin - I had lost hope of sorting it.

It does get to the point where it just keeps draining, but it was doing that without the leak. I even removed the float in case something was tripping it the other day, and it still did it. Is it worth buying that joiner - do you think I will get it working?

I didnt have a bottle brush, but I managed the use a piece of cloth and a screwdriver, but unfortunately I pushed the screwdriver a bit too wildly and I have pierced the pipe, so I have put some plumbmate round it temporarily and will get a new one if I can get the dishwasher working (cant...

Not at all Colin, at the moment it is just sat there because I really dont think its worth spending £100 on the PCB, so any input would be greatly appreciated. I have not done anything like push a bottle brush down the pipe (dont think we have one), but I have removed the water inlet hose...

Took a look at the PCB couldnt really see any popped components as such although on the brown cover that covers it I could see black marks which were right over 3 components. Not sure if they can be replaced or not. I dunno what to do now.

It appears I spoke to soon, as although it completed that first wash it is doing the same again, and now sometimes with the door open, so I have removed the float off the bottom in case it was the float switch because there is no water in the bottom. Any ideas, or is it looking like the PCB...

Thanks for all your help Zipper. I replaced the flow meter, and all is now resolved (well it has completed one wash, which it hadnt done for several weeks) :D

Thanks Zipper. That valve is it next to the pump. If so when I blew down the waste pipe I had to push that in to blow all the water out so I think I know thats working.

Hi Zipper, What do you think about the flow meter?