Search results

Hi SimonD i recall a small black tab i asked what it was for , he said oh nothing, i guess that was the gravity system link, nothing was doen to it heres the question , what are GRAVITY primaries, I am not sure thanks..

the changes the electronic part only, i reckon that is called the head, the danfoss electronic valve looks like this , they did not drain or bleed anything, http://www.plumbworld.co.uk/danfoss-h-series-3-port-0-12723 regarding the gravity link , i wonder if i can replace it if i remove...

this has worked for years and hapened after the service i was there and no wires were changed, when the Danfoss timer was replaced , it was taken of and old one put on no wires removed , it has lugs / connectors and was just screwed to the wall when the electronic valve was changed that...

HI All we have have had a central heating system in the house for years and no issues we could select water and heating to come ON via a timer or just water or heating only, INDEPENDENTLY. lately the burner had its annual service.After this we have had issue .. We have a Baxi system...

rocks1 ,,still the same issue washes heats water pumps it around but does not pump it out, So then i need to manually remove the water from the machine , with a hand pump or whtever, i "heard" that the main washer circulation pump works in series with this drain pump, even though...

rocks1 I see the smaller connector has 3 wires which lead to salt refil led , and the other one down to the antiflood device will try this and get back I have included pics of the back of the PCB also , looks like the diodes are micro diodes on the PCB I will try it tomorrow...

As a side note the antflood device has 3 connectors but the plug ony uses 2 as i recall it uses the top 2 connectors can anyone confirm this as hte connector is not keyed thanks Techstein.

rocks1 the board is similar to this it has 2 main connectors on it http://shop.ukwhitegoods.co.uk/popup_image.php?pID=2402&image=0 so i guess you mean the smaller connector thanks Techstein

between the 2 points there is continuity till the black button is pressed

Thanks rocks1, I Checked for green contacts I cleaned them as one was a bit green but not to bad . Now i also took out the high pressure sensor to test that also http://www.hotpoint-spares.co.uk/high-pressure-sensor-for-fdw20p-p-122251.html there are 2 pics attatched , i...

Thanks Rocks1 , will check that and post back mean while i have done some testing I figured the water level switch sets of differant devices depending on its state ,it makes connections active to diff devices , depending on the connections that are pushed down in it , by air pressure as...

I reckon these have a pressure switch and sensor as the hose from the pressure switch goes into the sump i will check this is clean and drops after sucktion is applied to ensure it is not jammed , i reckon these also have a pressure sensor , betweeen the big circulation pump, and the...