Search results

The plug going into the house socket has a 5 amp fuse and the cable from the plug socket leads into a round junction box in the hood (see picture) The cable then leads into the pcb and also the fan. There is no other fuses that I can see, just the 4 switches and couple of small capacitors on...

Result, lights now working !! Yes jj4091, I think both sides were originally tracks before the lights fused as you say. The first picture of the PCB I uploaded was taken at a different angle and it is not clear to see but it did look like the track had came away from the board when the...

No joy, Soldered new wire on the PCB but no lights with power on. Tested wire and getting continuity from pin to pin. Tested the other pin to pin on the right hand side of the PCB for continuity, which I have marked in the picture below and not getting any result ? Was wondering if this...

I had a good look around the cooker for any other part that may have been there before it melted but can't see anything.., either that or its now burnt dust. I have a bit of insulated wire that looks the same thickness as bell wire so going to try this. Thanks jj4091

Broken wire from lighting switch

Any advice on what wire type and thickness to use as the broken wire is too short to follow the existing path and looks thicker at some parts of it. sorry my knowledge in this is very poor. Picture of the broken wire on the PCB This is the wire I was thinking of using but not sure...

Hi, The lights blew on my Flavel cooker hood the other day and appears to have damaged a wire on the PCB module. The fan still works on all speeds and the only damage I can see is the wire running from the light switch on the circuit board has broken apart. Just wondering if this wire can...

Done exactly that and gave it a shake, the ball cock dropped and started to fill, yippee ! If only I could do that with me wallet :D Even the direction valve is working again as I unscrewed the housing and gave that a shake as well. Going to get new ball valve tomorrow before my luck...

Thanks for the quick response, have just checked the header tank as suggested and yes its empty. Have looked in several posts with this problem but haven't found any that were empty so far with a solution. Do I need to replace the pipe or can I give it a poke or something, although I don't...

Hi Folks, I have a glow-worm Mk 11 and when the C/H is turned on the hot water heats up as well. This is a problem we have lived with as all was working to some extent until now. Put the C/H on today and noticed a louder than normal noise coming from the pump, I think ! Everything seems to...

Located model number (SUNVIC SD2701) and by reading other posts in the forum got to Sunvic website who have this model listed :D Contacted them by phone and can supply through company such as Graham's, who have an account with them. Just hope they don't add to much to the list price :shock...

Hi, I have a glow-worm spacesaver 50brmk11 and had problem with HW not heating up. This was three years ago when I posted here for help and was advised the motorised valve could be sticking. The advice was spot on as I located the valve and gave it (Whit Fir) with a good shaking with both hands...

Good enough for me ChrisR. You have pointed me in the right direction and I really appreciate your time replying to my post, hopefully the valve will last for another few months yet, so I can recover from the Christmas dept, hehe. Thanks for your help Hammish.

Thanks for the quick reply ChrisR. Hot water at last :D I Found the motorised valve as you suggested in the post and gave it a shake, (spur of the moment thing, I think !) but it appears to have worked for now as the water is heating up again. Thanks again. I noticed that there is a...