Search results

Not sure, but can you get local council or an asbestos removal contracter o check and identify it ? If not sure I'd treat it as asbestos until otherwise

All about convenience really. I park the car overnight in garage with very limited space. Will be easier to sit charger on dashboard with window open a bit for power lead. I drive lots of short journeys , ok in summer but winter with wipers n lights heater demister on is another story

Could i cut off the croc. clips off the charger, and fit a ciggy lighter plug? the socket is always on, even when engine is off & key out ignition.

Great, I'll give that a go . Thanks

Hi all. My TV is 4 years old. I tried retuning due to the bilsdale transmitter being worked on. I tried to do a factory reset but kept showing the channel it was on. When I did a retune, all channels were lost and on another attempt , all the channels were mixed up.. eg I selected bbc 2 and got...

Thanks, could leave the half tile that should be 9 inches wide and 18 inches long but is 12 inches long?, The bottom edge is flush with bottom edge of tile above and exposes the lower tile by 6 inches. No where for water to get between tiles

Cheers. Battens don't protrude though, , probably why the cowboy eforts blew off. Is there anything for retrofit?

Re: bitumen, the surface needs to be dry when doing wood roof so I reckon that would pay to concrete. There was a product that goes on even damp surfaces with glass fibre resin in, can't remember what it's called , spread across the roof, not rubber but glass fibre

Hi all, Firstly, After storm Arwen, a couple of tiles were damaged by uplift. 18 inch square hardrow slates "half tiles" on the edge so 18x9 inch. I only had 1 spare so would it be ok to leave the other in place? Sorry I thought I had a pic, it's more 9x9 and the bottom edge is flush with the...

Hi mate, I used Whitehammerite paint after scaping off loose paint , preparation etc...

Hi Sorry for the delay in getting back, I shopped around and got it done for £60. Full Story.. (scene going all wiggly as we go back in time) My previous car, a Polo which was great, written off after someone crashed into the back of me September last year... Lockdown meant that getting another...

Changed the plugs, on my 59 plate only to find a fair amount of oil pooling next to number 3 and 4 spark plug. I changed the plugs and fitted new HT leads , silicon grease on spark plug end boots with cotton bud careful not to touch the connector but didnt do the boots at coil end as silicon...

Thanks, im a auspicious bugger lol Much appreciated

a mechanic, said the lid on my fiesta zetec was tight, he took it off and squirted lots of WD40 on the inside of the lid, before screwing it back on. I drove it 3 miles home, then rubbed it all off. I looked into the coolant fluid but couldn't tell if any dripped into the coolant. The wd40 left...

oh right, thanks!

Ahh right thanks ! The guys who fitted the system didn't put one on but i bought one straight away after inspecting their handywork

After looking into replaccing the oven element I discovered there's another element that looks similar to the grill one, but located underneath the oven.. If it blows would it be necessary to replace it or could I leave it?

Hello All, Daft question here.. After injecting Sentinel into an indirect heating system, would it be worth draining some water from the header tank up in the loft afterwards? (I was thinking of excess pressure on the ball cock valve by the float) I realise the level wouldn't go up much with...

Is it and other makes effective?