Search results

OK story so far. Machine stripped and 99% cleaned of fluff and gunk. Two pumps removed cleaned and checked. Back together, washing was fine. first drying cycle fine, second after about 15 mins E20. Turned machine off then on again and all was fine. The error code does not come on all the time...

The wash cycle is fine, I might take the pump off this weekend and have a look, but can't see there being a problem, but you never know. Might check the wires as well. My wife tried it today and twice it was ok. I came in and it happened again. Must be me.

Hi, I am after some help. My washer dryer Zanussi WJD1667W Part number 91460182500 has a fault of E20. The condenser has been fully cleaned and the filter is clear. The fan runs fine and seems to heat up for a while. All the cycles for the wash side are fine. The E20 comes on when drying only...

Zipper, thanks for your help up to now, I am aware of the loading of the machine, but this is not the problem. I am thinking it might be a timer problem, as it runs out of time very quickly.As I said in the first place

OK the fan and heater work. NTC at the top, changed. All that can be cleaned has been done. Could the NTC at the bottom be faulty. Is there any way of checking it. If this is ok, what do you suggest to do next.

On the side of the dryer heater box there is a manual reset thermostat, looks ok but don't know what to check. if it's the red button it seems fine.

PNC number is 914601825/00. On the l/h side of the heater box towards the back is what looks like a reset switch with a reddish button on it, but that seems to be ok, had a play with that. Don't know what a a cycling stat is, and yes the one at the front on the top is the one i changed.

Hi, Only changed the one at the top, i assume this is the thermostat. I am lead to believe that the NTC is the one at the bottom in the outlet hose. This I am going to look at tomorrow. Is there a way to test this. Mongoose.

Hi, Hope someone can help, so here goes. I have a Zanussi WJD1667W washer/dryer. When I set it to dry clothes, they come out hot and damp. I have read some ideas on this site and done the following. I have cleaned out the condenser bottle at the back, I have also done a code check and ended up...