Search results

cheers hope this explains what i mean

Hi, Have discovered that outside trim on 5 windowed bay dg window has no insulation between each connecting pane if that makes sense,just a large plastic trim covering each interconnecting pane kept on with double sided glazing tape and a gap at the top approx 2 inch hole that the trim was...

Jobs done.Turns out it was the pump that was faulty and given off electrical burning smell.

was serviced about 13 months ago

have done,cheers

old glowworm majorca 346 back boiler put on tonight ,An hour later came home too strong tyre/electrical burning type smell coming from it this evening.Possible spillage from chimney??? any advise would be appreciated.

aye lol wondered what the suite bit meant hopefully its a nice leather one !!!

new quote recieved today take off old guttering skipping all waste noggin out and fit new18mill ply board fitted flush down from fasia board to allow up stand to rubber epdm.supply and fit new interlocking moisture resistant interlocking treated osb boards to full flat roof deck .supply and...

My thoughts exactly!!

cheers think i will wait to get some more qoutes upto now for a roof 6 6 x 13 1 been qouted £4000 for a reboarding insulation fitted then rubberbond on top!! wtf!!! to £650 reboard over old felt then epdm fitted, he hasnt even came to view the job yet lol.

is this common pratice? thanks

old felt roof on a garage extension is knackered the roofer that came to examine the felt roof didnt do epdm but measured job up for me and states he knows someone that does this work .Anyway been offered to have epdm replacement when asked about job involved he states "what he does is reboard...

Hi All looks like my garage roof bedroom extension felt roof has past its sell by date been patched a few times so was thinking of getting a EDPM roof to replace is there any preference regarding using firestone or rubberbond (had some chap show me samples he was singing the praises of...

was a bit wary of filling the gaps, thought they may be drainage holes in the frame but the cold air blasting through them cant imagine i need 3 pre cut per window pane i like the idea of the plasticine ! cheers

just wondering, i have a double glazed bay window and can feel a cold draught constantly from the bottom of each window.this seems to cause excessive condensation on this window compared to others in the house .have had a good look around outside checking for holes/gaps,all seems fine Upon...

had the same problems with mine! in the end removed the internal plastic trims on either side of a couple of bay windows using a stanley knife . Then filled the gap with expanding foam, then when dried cut off the excess and reapplied the trim to the window, hope that helps