Search results

I will look for an RCBO that fits on the main switch side. Thanks very much for your help. Cheers

looks like 4 x B32 breakers. Downstair Ring north, downstair ring south, kitchen and utility & upstair ring main. Cable runs up preformed duct along with most other cables to upstair and then routed around the eaves space before dropping down a cavity to the isolation switch Thanks for your...

Fitting a new kitchen, replacing the old gas hob with a Neff induction hob. Fitted a new 6mm sq from the consumer unit, through to a 32A isolation switch beside the new appliance. Not yet fitted the cable to the consumer unit. Hob rated at 7.2KW max therefore was going to fit a 32A mcb at the...

It is an exposed valve. Strange thing is, his wife had shower first and it worked OK. He had shower 5 minutes later and it only ran cold. Do you think this is a thermostatic problem within the cartridge ?

Not asked him to clean filters but will pass on message. I have not had alook at his shower fitting ( Mira miniduo ), where are the filters and how easy are they to get to ? Yes tap based definately not electric, has been working fine for last 3 months and then cold one morning. Cheers

Was this problem ever resolved, as my son is having same problem in the house he bought recently. Shower only runs cold, but water to all other taps, including other shower, is OK. His shower is a Mira mini duo, I suspect the cartridge requires replacing, but any other thoughts would be welcome

Can probably fit a junction box in an easily accessable place upstairs and exted the cable. that will take care of a cable to the hob. will just have to figure out the easiest way to get a cable to the combi oven, which will also require a single cable back to the board. Thanks for your help

Isolator not visible,but may be behind the housing. Single circuit definately goes back to an mcb in the consumer unit. I never fitted the kitchen, it was proffesionally fitted 12 years ago. Will find out when I dismantle the oven housing. Does this matter now, seeing I am about to change the...

Currently have a single cable going back to an MCB. Re-fitting the kitchen and require the cable to be an additional 3 metres away from original outlet. Is it acceptable to join the cable in a junction box to add the additional length of cable? The reason for asking, is that it is extremely...