Search results

I am assuming the burning smell related to the transformer . I replaced this, I tested those one yesterday and there was no spark.

Thanks Chris, . The boiler comes on now and again then after maybe 30 minutes stops. There is no lockout. Would a damaged control box allow it to do this.

Hi, I need an experience plumber to suggest the next step. My oil boiler has stopped working with a burning smell after a month of no use. Nozzle replaced two months ago. I tested boiler motor and circuit pump and both working. I replaced transformer. Boiler started but stopped several times...

Thanks, yes I have cleaned chamber and baffles and they were in a fairly clean condition. OK I will run it for a longer period. I only need to run one radiator from it to heat my wifes work room in an outbuilding. I have an oil tank installed to feed this unit IF it runs but at the moment am...

I have had a problem with lots of black smoke on my worcester heatslave. The boiler has been standing for a few years. I have replace the nozzle twice and set pump pressure for nozzle size according to worcester manual. I have just dismantled the burner unit again and cleaned out the fan and...

Thanks for that, I have opened it two units from 3 to 5 but maybe the dial has been altered, so will keep opening.

I have changed the jet on this boiler twice, cleaned out the combustion chamber and adjusted the oil pressure with a gauge. I am feeding oil from a temporary container at the side of the boiler. Am I correct to suspect the oil pump. The boiler runs for a while and then the green indicator light...

many thanks John[/b]

Hi, Like others on here I am having problems with oil not feeding to the chain. I have cleaned out oil tank, cleaned oil supply channel and only a littl oil travels. Can anyone tell me if the oil pump gear and spring can be replaced - its behind the clutch- without taking off handle and oil pump.