Search results

Ok will double check later and rewire the tampers again to make sure. Thanks

Have taken it out of engineers mode and then removed the cover, makes no difference and only other links into the tamper terminals are the ones for the PIRs, which when i also tested by removing a PIR cover, didnt seem to work. There are only 2 tamper terminals on the control panel so wasnt...

Alarm thanks very much as problem is now fixed with the siren and strobe, seems it was diodes that had been put on which i replaced with alarm cable. All fine now. One other thing i noticed which hopefully you might be able to help with is that the control panel tamper does not seem to work...

Thats the name :D diodes Couldnt remember what they were called hence the kind of description. Yes its definitely looks like diodes put on. So i think best i remove them and just use alarm cable to connect them all back to Bell- Hopefully it works, will give it a try tonight and let you...

Thanks for quick response Alarm, can you confirm how best to connect the negative to Bell C and Strobe C? I think currently they are linked with jumper/resistor wires (small wires with type of resistor in the middle): So currently Bell- goes to Bell C and then Bell C goes to Strobe C...

Hi, Please can someone help me, I have just installed a Pyronix Sterling 10 alarm system and have connected a Texecom Odyssey E/1 bellbox. Everything seems to work fine except the siren and strobe on the Texecom bellbox won't activate when the alarm is triggered. The internal sounder...