Search results

Hi hoping someone could help advise me on which tap head to get to go over the top of my kitchen tap. I have tried a few variants but the depth difference between the thread and where the water comes out doesn’t seem to be universal Many thanks in advance Matt

Thanks I’ll try the Mac approach I’ve got a smartcom- which app should I use?

Thank you both Software version is V5.02.01LS1 - Elite 64 Ideally be able to remotely reset and view any errors

Is there a way of remotely accessing the Texecom panel (ideally not via Wintex as I only have a Mac and not windows- I don’t think Mac and wintex works?) in a similar way as you can with a Galaxy panel and something like the SelfMon app?

I guess something you would recommend for decent quality and Hikvision integration

Hi there Does anyone recommend a decent supplier and kit for a 4ch Hikvision IP cctv system (wanting to stick with Hikvision as the intercom is Hikvision too) Many thanks

Ahh ok thank you. One to remove and replace then Thanks very much

It appears to have been yes

Hi, appreciate its not cctv or alarms but in the process of buying a house that has this box next to the old intercom by the gates. Does anyone have any ideas what it is? Thanks in advance

Hi everyone Does anyone have a reasonably priced recommendation for a home safe? Thanks in advance

Even in entry yes without auto yes it still prompted for a key press after presenting the fob

Many thanks- user Auto yes seems to have cured it

Hi everyone Wonder if you could help with the below two questions The alarm is configured so that the ricochet door contact is the final set door so set as Entry/Exit and Area A exit is set as Entry/Exit If I try and set the panel with the door open the keypad states the door is preventing...

Thanks!

Hi everyone, hope you can help. I have the above panel installed and working well with the Smartcom facility installed. In the event of a full alarm triggering the panel in built sounder only blasts at half volume for 30 seconds and I don’t get an alert on my phone. After the 30 seconds it...

Thanks I’ll give a re-set a go Original prompt for restart was refurbishments at the property which meant power had to be lost at the panel, battery was disconnected so the panel could be moved slightly as part of this refurb but all the cables are still intact Thank you for coming back to...

I’ve got a Karizma plus panel with about 8 detectors and 2 keys pads following a reboot the system now sticks on *System Init* then goes to *System Busy* if I start pressing keys on the keypad. Does anyone have any advice on how to get the panel working again? It would save a lot of money on...

Thanks both!

Hi everyone I’ve recently bought and commissioned a Texecom Premier Ricochet kit with a wireless keypad and saw on another forum that the keypad can be taken out of power saving mode? Currently to use a prox tag I have to wake the keypad up first which is a little annoying so any help is...

Perfect thank you for your help!