Search results

Hi zipper, I've not had chance to test the pressostat and inlet valve just yet because I've been super busy at work and not been at home enough to spend any time on the dishwasher! The two numbers on the inside of the door at the top are - Typ: HG01 & No: 30/65000553. If these aren't what you...

*Apologies, my phone's playing up, hence the three posts!

Ok, I've tried it with various amounts of water in the bottom. On each occasion I waited until it started to fill then put the water in before closing the door. Initially with a small amount of water the washer did the same thing it usually does and stopped after it had filled. As I put more...

When it stops the base is only just covered and the water doesn't quite go all the way to the edges. I'll give this a go and let you know what happens! Thanks for your help so far.

Thanks for your patience. I've tried erasing the fault log by putting it into the error reading mode and then switching off without turning the selector switch to the stop position but this didn't seem to work. When I put it back in error mode after I thought I had erased it and without running...

zipper, I've tried doing what you said. I managed to get a screwdriver inbetween the windings on the motor and turn the metal rotor blades inside. They were stiff initially but soon freed off and turned easily after a couple of rotations. I put it back together and tried the washer but it's...

Thanks for your help zipper. I've done what you said and the green fault light comes on in the 9 o'clock position. Apparently the dishwasher worked fine before it was taken out of the kitchen it was in and stored in the garage! It did have a small amount of water in the bottom when I got it.

Could it be anything other than the pressure switch(es)? It was sat in a garage for about a year before I got it.

G641 Plus

I have a Miele dishwasher that will not fill up properly. It drains, fills with a small amount of water in the bottom and then everything stops. Does anyone know where to find the pressure switches and how to check they're working properly (multimeter testing or should they have water in them...